Home › Brake › PARKING BRAKE › PARKING BRAKE CABLE(for 2WD) › from 2012.10
RM1840EF _54 Brake _009627 PARKING BRAKE _0052637 PARKING BRAKE CABLE(for 2WD) A

PARKING BRAKE  PARKING BRAKE CABLE(for 2WD)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

C237683
3.906,5.542 3.906,6.219 false 2.042,0.49 2.042,0.281 2.042,0.281 1.854,0.281 true 3.844,6.24 4.01,6.396 0.167,0.156 10 false *1 1.646,0.208 1.813,0.365 0.167,0.156 10 false *2 0.167,1.375 0.354,1.552 0.188,0.177 10 false A 2.063,2.573 2.188,2.719 0.125,0.146 10 false C 3.833,4.354 3.958,4.5 0.125,0.146 10 false A 0.865,5.979 0.99,6.156 0.125,0.177 10 false A 6.5,6.042 6.625,6.198 0.125,0.156 10 false B
*1 No. 3 Parking Brake Cable *2 No. 3 Clip


a.

Install the No. 3 parking brake cable with the 4 bolts and nut.

Torque:
for Bolt A, Nut C : 26 N*m (260 kgf*cm, 19 ft.*lbf)
for Bolt B : 14 N*m (143 kgf*cm, 10 ft.*lbf)


b.

Install the No. 3 clip.


c.

Connect the No. 3 parking brake cable to the parking brake shoe lever LH and backing plate LH.

i.

Connect the No. 3 parking brake cable to the backing plate with the 2 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


ii.

Connect the No. 3 parking brake cable to the parking brake shoe lever (See page Brake>BRAKE (REAR)>REAR BRAKE(for 2WD)>REASSEMBLY).



Hide 2.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY

C281349
4.281,1.24 4.281,0.583 4.281,0.583 4.542,0.583 false 0.958,2.625 0.958,3.177 false 2.885,0.5 3.042,0.698 0.156,0.198 10 false A 3.375,0.51 3.531,0.708 0.156,0.198 10 false A 6.521,0.938 6.677,1.135 0.156,0.198 10 false B 4.104,3.063 4.26,3.26 0.156,0.198 10 false A 4.594,0.49 4.906,0.688 0.313,0.198 10 false *1 0.875,3.219 1.188,3.417 0.313,0.198 10 false *2
*1 No. 2 Parking Brake Cable *2 Parking Brake Equalizer


a.

Install the No. 2 parking brake cable with the 4 bolts.

Torque:
for Bolt A : 26 N*m (260 kgf*cm, 19 ft.*lbf)
for Bolt B : 14 N*m (143 kgf*cm, 10 ft.*lbf)


b.

Connect the No. 2 parking brake cable to the parking brake equalizer and apply MP grease to the connecting portion.


c.

Connect the cable to the parking brake shoe lever RH and backing plate RH.

i.

Connect the No. 2 parking brake cable to the backing plate with the 2 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


ii.

Connect the No. 2 parking brake cable to the parking brake shoe lever (See page Brake>BRAKE (REAR)>REAR BRAKE(for 2WD)>REASSEMBLY).

HINT:

Use the same procedure described for the LH side.




Hide 3.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY

C237681
2.823,3.135 2.823,1.708 2.823,1.708 2.156,1.708 true 4.417,2.385 3.063,1.115 3.063,1.115 2.427,1.115 true 4.406,0.417 2.917,0.417 true 5.729,2.677 5.583,2.417 5.583,2.417 5.365,2.417 false 1.927,1.635 2.083,1.802 0.156,0.167 10 false *1 2.208,1.021 2.365,1.188 0.156,0.167 10 false *2 2.688,0.344 2.844,0.51 0.156,0.167 10 false *3 5.219,2.344 5.375,2.51 0.156,0.167 10 false *4
*1 No. 1 Parking Brake Cable *2 No. 3 Parking Brake Cable
*3 Parking Brake Equalizer *4 Cable Support Bracket


a.

Connect the No. 1 parking brake cable to the parking brake lever (See page Brake>PARKING BRAKE>PARKING BRAKE LEVER>INSTALLATION).


b.

Install the No. 1 parking brake cable clamp to the No. 1 parking brake cable.


c.

Install the No. 1 parking brake cable with the bolt.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


d.

Connect the No. 1 parking brake cable to the parking brake equalizer.


e.

Connect the No. 1 parking brake cable to the No. 3 parking brake cable and apply MP grease to the connecting portion.


f.

Install the pin and No. 1 clip.


g.

Attach the No. 1 parking brake cable to the cable support bracket.


h.

Install the No. 1 heat insulator with the 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 4.CHECK REAR BRAKE DRUM INSTALLATION

Hide 5.INSTALL REAR BRAKE DRUM SUB-ASSEMBLY AND NEW GASKET

Hide 7.ADJUST PARKING BRAKE

Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).