Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
88625Q
1.INSTALL COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)
Attach the claw to install the cooler thermistor (room temperature sensor).
55447C
2.INSTALL NO. 2 SWITCH HOLE BASE
55011A
3.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
55667
4.INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH
55410C
5.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
45100
6.INSTALL STEERING WHEEL ASSEMBLY