Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses, relays and bulbs related to this system before inspecting the suspected areas below.
*1: w/ Smart Entry and Start System
*2: w/o Smart Entry and Start System
*1: w/o Smart Entry and Start System
| Symptom | Suspected Area | Link |
|---|---|---|
| Map light does not illuminate | Map light assembly (for LED Type) |
|
| Map light assembly (for LED Type) |
|
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| No. 1 room light does not illuminate | No. 1 room light assembly |
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| No instrument panel illumination comes on | Headlight dimmer switch assembly |
|
| Harness or connector | - |