86300B
1.INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY
Attach the claws to install the No. 1 amplifier antenna assembly.
|
Install in this Direction |
w/o Telematics System
Install the nut.
Attach the clamp and connect the connector.
|
Install in this Direction |
w/ Telematics System
Install the nut.
Attach the clamp and connect the connectors.
86309E
2.INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY
63310
3.INSTALL ROOF HEADLINING ASSEMBLY
for Single Cab:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Single Cab)>INSTALLATION
for Smart Cab:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Smart Cab)>INSTALLATION
for Double Cab:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Double Cab)>INSTALLATION
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).