2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

Speaker Circuit

Circuit diagnosis · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The navigation receiver assembly sends sound signals to the speakers.

WIRING DIAGRAM

E286140E02
E286141E02

INSPECTION PROCEDURE


1. CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)
  1. *1: for RH Side
  2. *2: for LH Side
  1. Disconnect the J4*1 and/or K3*2 front No. 1 speaker assembly connector.

  1. Disconnect the H10*1 and/or H13*2 front No. 2 speaker assembly connector.

  1. Disconnect the H21*1 and/or H22*2 front No. 3 speaker assembly connector.

  1. Disconnect the H14 front No. 4 speaker assembly connector.

  1. Disconnect the L1*1 and/or M1*2 rear speaker set connector.

  1. Disconnect the L3*1 and/or M3*2 rear No. 2 speaker assembly connector.

  1. Disconnect the Q15*1 and/or R13*2 rear header speaker assembly connector.

  1. Disconnect the R24 No. 1 speaker with box assembly connector.

  1. Disconnect the H65 and H66 stereo component amplifier assembly connectors.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    H65-4 (FR+) - H21-1 (TWR+)*1
    Always
    Below 1 Ω
    H65-10 (FR-) - H21-2 (TWR-)*1
    Always
    Below 1 Ω
    H21-3 (+) - H10-2*1
    Always
    Below 1 Ω
    H21-4 (-) - H10-1*1
    Always
    Below 1 Ω
    H66-10 (WFR+) - J4-1*1
    Always
    Below 1 Ω
    H66-9 (WFR-) - J4-2*1
    Always
    Below 1 Ω
    H65-3 (FL+) - H22-1 (TWL+)*2
    Always
    Below 1 Ω
    H65-9 (FL-) - H22-2 (TWL-)*2
    Always
    Below 1 Ω
    H22-3 (+) - H13-2*2
    Always
    Below 1 Ω
    H22-4 (-) - H13-1*2
    Always
    Below 1 Ω
    H65-1 (WF1+) - R24-1 (WF1+)
    Always
    Below 1 Ω
    H65-5 (WF1-) - R24-3 (WF1-)
    Always
    Below 1 Ω
    H65-2 (WF2+) - R24-2 (WF2+)
    Always
    Below 1 Ω
    H65-6 (WF2-) - R24-4 (WF2-)
    Always
    Below 1 Ω
    H66-2 (MR+) - Q15-2*1
    Always
    Below 1 Ω
    H66-7 (MR-) - Q15-1*1
    Always
    Below 1 Ω
    H66-3 (WFL+) - K3-1*2
    Always
    Below 1 Ω
    H66-8 (WFL-) - K3-2*2
    Always
    Below 1 Ω
    H66-5 (RR+) - L3-1 (+TW)*1
    Always
    Below 1 Ω
    H66-12 (RR-) - L3-2 (-TW)*1
    Always
    Below 1 Ω
    L3-3 (+) - L1-1*1
    Always
    Below 1 Ω
    L3-4 (-) - L1-2*1
    Always
    Below 1 Ω
    H66-4 (RL+) - M3-1 (+TW)*2
    Always
    Below 1 Ω
    H66-11 (RL-) - M3-2 (-TW)*2
    Always
    Below 1 Ω
    M3-3 (+) - M1-1*2
    Always
    Below 1 Ω
    M3-4 (-) - M1-2*2
    Always
    Below 1 Ω
    H66-1 (ML+) - R13-2*2
    Always
    Below 1 Ω
    H66-6 (ML-) - R13-1*2
    Always
    Below 1 Ω
    H65-8 (CTR+) - H14-2
    Always
    Below 1 Ω
    H66-7 (CTR-) - H14-1
    Always
    Below 1 Ω
    H65-4 (FR+) - Body ground*1
    Always
    10 kΩ or higher
    H65-10 (FR-) - Body ground*1
    Always
    10 kΩ or higher
    H21-3 (+) - Body ground*1
    Always
    10 kΩ or higher
    H21-4 (-) - Body ground*1
    Always
    10 kΩ or higher
    H66-10 (WFR+) - Body ground*1
    Always
    10 kΩ or higher
    H66-9 (WFR-) - Body ground*1
    Always
    10 kΩ or higher
    H65-3 (FL+) - Body ground*2
    Always
    10 kΩ or higher
    H65-9 (FL-) - Body ground*2
    Always
    10 kΩ or higher
    H22-3 (+) - Body ground*2
    Always
    10 kΩ or higher
    H22-4 (-) - Body ground*2
    Always
    10 kΩ or higher
    H65-1 (WF1+) - Body ground
    Always
    10 kΩ or higher
    H65-5 (WF1-) - Body ground
    Always
    10 kΩ or higher
    H65-2 (WF2+) - Body ground
    Always
    10 kΩ or higher
    H65-6 (WF2-) - Body ground
    Always
    10 kΩ or higher
    H66-2 (MR+) - Body ground*1
    Always
    10 kΩ or higher
    H66-7 (MR-) - Body ground*1
    Always
    10 kΩ or higher
    H66-3 (WFL+) - Body ground*2
    Always
    10 kΩ or higher
    H66-8 (WFL-) - Body ground*2
    Always
    10 kΩ or higher
    H66-5 (RR+) - Body ground*1
    Always
    10 kΩ or higher
    H66-12 (RR-) - Body ground*1
    Always
    10 kΩ or higher
    L3-3 (+) - Body ground*1
    Always
    10 kΩ or higher
    L3-4 (-) - Body ground*1
    Always
    10 kΩ or higher
    H66-4 (RL+) - Body ground*2
    Always
    10 kΩ or higher
    H66-11 (RL-) - Body ground*2
    Always
    10 kΩ or higher
    M3-3 (+) - Body ground*2
    Always
    10 kΩ or higher
    M3-4 (-) - Body ground*2
    Always
    10 kΩ or higher
    H66-1 (ML+) - Body ground*2
    Always
    10 kΩ or higher
    H66-6 (ML-) - Body ground*2
    Always
    10 kΩ or higher
    H65-8 (CTR+) - Body ground
    Always
    10 kΩ or higher
    H66-7 (CTR-) - Body ground
    Always
    10 kΩ or higher



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


2. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
  1. Remove the front No. 1 speaker assembly (Click here).

  1. Inspect the front No. 1 speaker assembly (Click here).



NG
REPLACE FRONT NO. 1 SPEAKER ASSEMBLY (Click here)
OK


3. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
  1. Remove the front No. 2 speaker assembly (Click here).

  1. Inspect the front No. 2 speaker assembly (Click here).



NG
REPLACE FRONT NO. 2 SPEAKER ASSEMBLY (Click here)
OK


4. CHECK FRONT NO. 3 SPEAKER ASSEMBLY
  1. Replace the front No. 3 speaker assembly with a known good one (Click here).

  1. Check that the malfunction disappears.

    NOTICE:
    1. Connect all the connectors that were disconnected to the front No. 3 speaker assemblies.
    2. Perform the above inspection on both LH and RH sides.

    OK:
    Malfunction disappears.



NG
Go to step 5
OK

END (FRONT NO. 3 SPEAKER ASSEMBLY IS DEFECTIVE)

5. CHECK FRONT NO. 4 SPEAKER ASSEMBLY
  1. Replace the front No. 4 speaker assembly with a known good one (Click here).

  1. Check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
Go to step 6
OK

END (FRONT NO. 4 SPEAKER ASSEMBLY IS DEFECTIVE)

6. INSPECT REAR SPEAKER SET
  1. Remove the rear speaker set with a known good one (Click here).

  1. Inspect the rear speaker set with a known good one (Click here).



NG
REPLACE REAR SPEAKER SET (Click here)
OK


7. CHECK REAR NO. 2 SPEAKER ASSEMBLY
  1. Replace the rear No. 2 speaker assembly with a known good one (Click here).

  1. Check that the malfunction disappears.

    NOTICE:
    1. Connect all the connectors that were disconnected to the rear No. 2 speaker assemblies.
    2. Perform the above inspection on both LH and RH sides.

    OK:
    Malfunction disappears.



NG
Go to step 8
OK

END (REAR NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

8. CHECK REAR HEADER SPEAKER ASSEMBLY
  1. Replace the rear header speaker assembly with a known good one (Click here).

  1. Check that the malfunction disappears.

    NOTICE:
    1. Connect all the connectors that were disconnected to the rear header speaker assemblies.
    2. Perform the above inspection on both LH and RH sides.

    OK:
    Malfunction disappears.



NG
Go to step 9
OK

END (REAR HEADER SPEAKER ASSEMBLY IS DEFECTIVE)

9. INSPECT NO. 1 SPEAKER WITH BOX ASSEMBLY
  1. Remove the No. 1 speaker with box assembly (Click here).

  1. Inspect the No. 1 speaker with box assembly (Click here).



NG
REPLACE NO. 1 SPEAKER WITH BOX ASSEMBLY (Click here)
OK


10. CHECK STEREO COMPONENT AMPLIFIER ASSEMBLY
  1. Replace the stereo component amplifier assembly with a known good one (Click here).

  1. Check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END (STEREO COMPONENT AMPLIFIER ASSEMBLY IS DEFECTIVE)


← Speaker Circuit (Aug 2013 – Jul 2014)Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier (Aug 2013 – Jul 2014) →