Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
DESCRIPTION
This circuit is the power source circuit to operate the parking assist ECU. The parking assist ECU controls the parking assist monitor system and side monitor system.
HINT:
The parking assist ECU is connected to other ECUs via CAN communication or AVC-LAN communication.
for Navigation Receiver Type: If the parking assist ECU does not operate due to a power source problem, a navigation system DTC may be stored due to an AVC-LAN communication interruption.
for Radio and Display Type: If the parking assist ECU does not operate due to a power source problem, an audio and visual system DTC may be stored due to an AVC-LAN communication interruption.
If the parking assist ECU does not operate due to a power source problem, other system DTCs may be stored due to a CAN communication interruption.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuse for circuits related to this system before performing the following inspection procedure.
1. CHECK FOR DTC (NAVIGATION SYSTEM OR AUDIO AND VISUAL SYSTEM)
The parking assist ECU is connected to the navigation receiver assembly*1 or radio and display receiver assembly*2 by AVC-LAN communication line. DTC B15D8 may be stored to the navigation receiver assembly*1 or radio and display receiver assembly*2 due to the power source condition or changes in the power supply waveform for the parking assist ECU, even though there is no problem with the AVC-LAN communication system.