Home › Audio / Visual / Telematics › AUDIO / VIDEO › LUGGAGE SPEAKER (for 5 Door)
REMOVAL
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.
REMOVE REAR NO. 2 SEAT ASSEMBLY
for Manual Seat Type: (Click here )
for Power Seat Type: (Click here )
for Face to Face Seat Type: (Click here )
2.
REMOVE REAR NO. 1 SEATBACK ASSEMBLY
for 60/40 Split Double-folding Seat Type LH Side: (Click here )
for 60/40 Split Double-folding Seat Type RH Side: (Click here )
3.
REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)
HINT:
Use the same procedure for all rear No. 1 floor step covers.
Using a screwdriver, detach the 2 claws and remove the rear No. 1 floor step cover.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
4.
REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)
Remove the 2 bolts and quarter scuff plate.
5.
REMOVE REAR DOOR SCUFF PLATE LH
Put protective tape around the rear door scuff plate.
Using a screwdriver, detach the 3 clips, 6 claws and 2 guides and remove the rear door scuff plate.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
6.
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
Remove the rear door opening trim weatherstrip.
7.
REMOVE OUTER LAP BELT ANCHOR COVER
HINT:
Use the same procedure for the other outer lap belt anchor cover.
Detach the 3 claws and remove the outer lap belt anchor cover.
8.
REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
Remove the tonneau cover.
9.
REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)
HINT:
Use the same procedure for the other front luggage compartment trim cover.
Detach the 4 claws and remove the cap.
Remove the bolt, luggage hold belt striker and front luggage compartment trim cover.
Text in Illustration
*1
Luggage Hold Belt Striker
10.
REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)
Detach the clip and remove the No. 1 deck board.
11.
REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)
Detach the 5 clips and 4 claws and remove the rear floor mat rear support plate.
12.
REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)
Remove the 3 bolts and floor side rail.
13.
REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)
HINT:
Use the same procedure described for the LH side.
14.
REMOVE REAR FLOOR CARPET ASSEMBLY
Detach the 4 claws and remove the rear floor carpet.
Text in Illustration
*A
w/o Deck Rail
*B
w/ Deck Rail
*C
for Face to Face Seat Type
-
-
15.
REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER
HINT:
Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.
Detach the 3 claws and remove the rear No. 1 seat outer lap belt anchor cover.
16.
REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
HINT:
Use the same procedure for the other No. 1 luggage compartment trim hook.
Remove the luggage compartment trim hook by turning it clockwise.
17.
REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)
HINT:
Use the same procedure for the other No. 1 tonneau cover holder cap.
Using a screwdriver, detach the 2 claws and remove the No. 1 tonneau cover holder cap.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
18.
REMOVE FRONT DECK SIDE TRIM COVER RH (w/ Tonneau Cover)
HINT:
Use the same procedure for the other front deck side trim cover.
Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
19.
REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)
HINT:
Use the same procedure for all assist grip plugs.
Using a screwdriver, detach the 2 claws and remove the assist grip plug.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
20.
REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)
HINT:
Use the same procedure for the other assist grip.
Remove the 2 bolts and assist grip.
21.
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
w/o Rear No. 2 Seat:
Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.
Detach the 6 claws and 2 guides and disconnect the rear seatback lock control lever base.
Remove the 4 bolts and 2 screws.
Detach the 5 clips and 8 claws.
Pass the rear seatback lock control lever base through the deck trim side panel and remove the deck trim side panel.
w/ Rear No. 2 Seat:
Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.
Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.
Remove the 2 bolts and 2 screws.
Detach the 4 clips and 8 claws and remove the deck trim side panel.
22.
REMOVE NO. 1 SPEAKER WITH BOX ASSEMBLY
Disconnect the connector.
Remove the 5 bolts and No. 1 speaker with box assembly.
23.
REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH
w/o Rear No. 2 Seat:
Detach the 7 clips and 2 guides and remove the rear quarter trim panel.
w/ Rear No. 2 Seat:
Detach the 7 clips and 2 guides.
Detach the 4 clips and 2 guides, pass the rear No. 2 seat outer belt floor anchor through the rear quarter trim panel and remove the rear quarter trim panel.
24.
REMOVE REAR HEADER SPEAKER ASSEMBLY
Disconnect the connector.
Remove the 2 bolts and rear header speaker assembly.