2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

PROBLEM SYMPTOMS TABLE

Troubleshooting · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

Entire System 
Symptom
Suspected Area
See page
System does not operate at all
(both the blind spot monitor function and RCTA function do not operate)
Proceed to "Power Source Circuit"
Click here
CAN communication system (for LHD with Entry and Start System)
Click here
CAN communication system (for LHD without Entry and Start System)
Click here
CAN communication system (for RHD with Entry and Start System)
Click here
CAN communication system (for RHD without Entry and Start System)
Click here
Proceed to "B2660"
Click here
Blind spot monitor sensor LH
Click here
System cannot be turned off
CAN communication system (for LHD with Entry and Start System)
Click here
CAN communication system (for LHD without Entry and Start System)
Click here
CAN communication system (for RHD with Entry and Start System)
Click here
CAN communication system (for RHD without Entry and Start System)
Click here
Proceed to "B2660"
Click here
Blind spot monitor sensor LH
Click here
"BSM not available" is displayed on the multi-information display
Check abnormality history
Click here
Blind spot monitor sensor LH
Click here
Blind spot monitor sensor RH
Click here
"Check BSM system" is displayed on the multi-information display
Check abnormality history
Click here
Blind spot monitor sensor LH
Click here
Blind spot monitor sensor RH
Click here
Blind Spot Monitor Function 
Symptom
Suspected Area
See page
Outer rear view mirror indicator RH does not illuminate
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Outer rear view mirror sub-assembly RH (blind spot monitor indicator RH)
Click here
Outer rear view mirror assembly RH
Click here
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH does not illuminate
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Outer rear view mirror sub-assembly LH (blind spot monitor indicator LH)
Click here
Outer rear view mirror assembly LH
Click here
Blind spot monitor sensor LH
Click here
Outer rear view mirror indicator RH remains illuminated
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH remains illuminated
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Blind spot monitor sensor LH
Click here
Outer rear view mirror indicator RH does not flash
Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting section
Click here
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH does not flash
Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting section
Click here
Blind spot monitor sensor LH
Click here
Outer rear view mirror indicator RH continues to flash
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH continues to flash
Blind spot monitor sensor LH
Click here
RCTA Function (w/ RCTA) 
Symptom
Suspected Area
See page
Function does not operate at all
(the blind spot monitor function operates normally)
Data List / Active Test (Reverse)
Click here
Automatic transmission system (for 1GR-FE) (for Automatic Transmission)
Click here
Automatic transmission system (for 1KD-FTV) (for Automatic Transmission)
Click here
Proceed to "Reverse Signal Circuit" (for Manual Transmission)
Click here
Blind spot monitor sensor RH (for Manual Transmission)
Click here
Blind spot monitor sensor LH (for Automatic Transmission)
Click here
← OPERATION CHECK (from Aug 2014)PROBLEM SYMPTOMS TABLE (from Aug 2014) →