Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260466 CRANKSHAFT POSITION SENSOR A

1GD-FTV ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)

Hide 2.REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)

Hide 31210 3.REMOVE CLUTCH COVER ASSEMBLY (for Manual Transmission)

Hide 31250 4.REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission)

Hide 25804A 9.DISCONNECT VACUUM SWITCHING VALVE SUB-ASSEMBLY

A353022

a.

Remove the bolt and nut, and disconnect the vacuum switching valve sub-assembly.


Hide 27148A 10.REMOVE CONNECTING WIRE

A353005

a.

Disconnect the 2 connectors and clamp, and remove the connecting wire.


Hide 11.REMOVE CRANKSHAFT POSITION SENSOR HARNESS BRACKET

A353006

a.

Remove the bolt and crankshaft position sensor harness bracket from the cylinder block sub-assembly.


Hide 11401Q 12.REMOVE CRANKSHAFT POSITION SENSOR

A346047

a.

Remove the bolt and crankshaft position sensor from the rear oil seal retainer.