Home › Engine / Hybrid System › 1GD-FTV (ENGINE MECHANICAL) › REAR CRANKSHAFT OIL SEAL
RM27T0E _51 Engine / Hybrid System _053665 1GD-FTV ENGINE MECHANICAL _0260528 REAR CRANKSHAFT OIL SEAL A

1GD-FTV ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 33030 1.REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY (for Manual Transmission)

Hide 35000 2.REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)

Hide 31210 3.REMOVE CLUTCH COVER ASSEMBLY (for Manual Transmission)

Hide 31250 4.REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission)

Hide 11381A 7.REMOVE ENGINE REAR OIL SEAL

a.
A340242E02
1.875,1.406 1.875,1.802 false 2.438,0.542 2.24,0.542 2.24,0.542 1.781,0.906 true 1.146,1.667 1.323,1.833 0.177,0.167 10 false *c 1.813,1.813 1.99,1.979 0.177,0.167 10 false *b 2.458,0.448 2.635,0.615 0.177,0.167 10 true *a

Using a knife, cut off the lip of the rear engine oil seal.

Text in Illustration
*a Protective Tape
*b Cloth
*c Cut


b.

Using a cloth and screwdriver, pry out the rear engine oil seal from the rear engine oil seal retainer.

NOTICE:

Be careful not to damage the crankshaft and rear engine oil seal retainer.


HINT:
·

After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.

·

Tape the screwdriver tip before use.