Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT AXLE HUB
RM27T0E _52 Drivetrain _053705 AXLE AND DIFFERENTIAL _0260855 FRONT AXLE HUB G

AXLE AND DIFFERENTIAL  FRONT AXLE HUB  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 47750 2.REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY LH

Hide 43512 3.REMOVE FRONT DISC

Hide 43514C 4.REMOVE FRONT AXLE HUB GREASE CAP

Hide 5.INSPECT FRONT AXLE HUB BEARING LOOSENESS

a.
C098703

Using a dial indicator, measure the looseness near the center of the axle hub.

Maximum looseness:

0.05 mm (0.00197 in.)


NOTICE:

Make sure that the dial indicator is set at a right angle to the measurement surface.


If the looseness is more than the maximum, replace the axle hub.


Hide 6.INSPECT FRONT AXLE HUB RUNOUT

a.
C098704

Using a dial indicator, measure the runout on the surface of the axle hub outside the hub bolts.

Maximum runout:

0.08 mm (0.00315 in.)


NOTICE:

Make sure that the dial indicator is set at a right angle to the measurement surface.


If the runout is more than the maximum, replace the axle hub.


Hide 43514C 7.INSTALL FRONT AXLE HUB GREASE CAP

Hide 47750 9.INSTALL DISC BRAKE CYLINDER ASSEMBLY LH

Hide 10.INSTALL FRONT WHEEL

Torque:
for Aluminum Wheel : 103 N*m (1050 kgf*cm, 76 ft.*lbf)
for Steel Wheel : 112 N*m (1137 kgf*cm, 82 ft.*lbf)