Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261011 BLIND SPOT MONITOR SYSTEM T

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


Entire System
Symptom Suspected Area See page
System does not operate at all
(both the blind spot monitor function and RCTA function do not operate)
Proceed to "Power Source Circuit" (Click here)
CAN communication system (for LHD with Entry and Start System) (Click here)
CAN communication system (for LHD without Entry and Start System) (Click here)
CAN communication system (for RHD with Entry and Start System) (Click here)
CAN communication system (for RHD without Entry and Start System) (Click here)
Proceed to "B2660" (Click here)
Blind spot monitor sensor LH (Click here)
System cannot be turned off CAN communication system (for LHD with Entry and Start System) (Click here)
CAN communication system (for LHD without Entry and Start System) (Click here)
CAN communication system (for RHD with Entry and Start System) (Click here)
CAN communication system (for RHD without Entry and Start System) (Click here)
Proceed to "B2660" (Click here)
Blind spot monitor sensor LH (Click here)
"BSM not available" is displayed on the multi-information display Check abnormality history (Click here)
Blind spot monitor sensor LH (Click here)
Blind spot monitor sensor RH (Click here)
"Check BSM system" is displayed on the multi-information display Check abnormality history (Click here)
Blind spot monitor sensor LH (Click here)
Blind spot monitor sensor RH (Click here)

Blind Spot Monitor Function
Symptom Suspected Area See page
Outer rear view mirror indicator RH does not illuminate Proceed to "Blind Spot Monitor Beam Axis Confirmation" (Click here)
Outer rear view mirror sub-assembly RH (blind spot monitor indicator RH) (Click here)
Outer rear view mirror assembly RH (Click here)
Blind spot monitor sensor RH (Click here)
Outer rear view mirror indicator LH does not illuminate Proceed to "Blind Spot Monitor Beam Axis Confirmation" (Click here)
Outer rear view mirror sub-assembly LH (blind spot monitor indicator LH) (Click here)
Outer rear view mirror assembly LH (Click here)
Blind spot monitor sensor LH (Click here)
Outer rear view mirror indicator RH remains illuminated Proceed to "Blind Spot Monitor Beam Axis Confirmation" (Click here)
Blind spot monitor sensor RH (Click here)
Outer rear view mirror indicator LH remains illuminated Proceed to "Blind Spot Monitor Beam Axis Confirmation" (Click here)
Blind spot monitor sensor LH (Click here)
Outer rear view mirror indicator RH does not flash Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting section (Click here)
Blind spot monitor sensor RH (Click here)
Outer rear view mirror indicator LH does not flash Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting section (Click here)
Blind spot monitor sensor LH (Click here)
Outer rear view mirror indicator RH continues to flash Blind spot monitor sensor RH (Click here)
Outer rear view mirror indicator LH continues to flash Blind spot monitor sensor LH (Click here)

RCTA Function (w/ RCTA)
Symptom Suspected Area See page
Function does not operate at all
(the blind spot monitor function operates normally)
Data List / Active Test (Reverse) (Click here)
Automatic transmission system (for 1KD-FTV) (for Automatic Transmission) (Click here)
Proceed to "Reverse Signal Circuit" (for Manual Transmission) (Click here)
Blind spot monitor sensor RH (for Manual Transmission) (Click here)
Blind spot monitor sensor LH (for Automatic Transmission) (Click here)