Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261147 OCCUPANT DETECTION SENSOR A

SEAT BELT  OCCUPANT DETECTION SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Bench Seat Type)

a.
B294317E03
3.115,0.729 2.302,0.875 true 1.698,3.781 1.781,3.146 1.781,3.146 1.927,3.146 false 1.958,3.063 2.167,3.26 0.208,0.198 10 false *1 3.135,0.625 3.365,0.823 0.229,0.198 10 false *2

Using hog ring pliers, install the separate type front seat cushion pad to the separate type front seat cushion cover with new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.



Text in Illustration
*1 Hog Ring Pliers
*2 Tack pin


b.

Using a tacker, install the separate type front seat cushion cover to the separate type front seat cushion pad with a new tack pin as shown in the illustration.


c.
B301193E02
1.448,0.854 1.177,0.354 true 0.646,0.927 1.313,1.073 true 2.177,1.427 1.969,1.146 true 1.781,3.792 1.885,2.938 1.885,2.938 2,2.938 false 1,0.177 1.24,0.354 0.24,0.177 10 false *1 0.448,0.844 0.688,1.073 0.24,0.229 10 false *2 2.031,2.854 2.26,3.052 0.229,0.198 10 false *3 2.167,1.448 2.375,1.646 0.208,0.198 10 false *2

Attach the hook.

Text in Illustration
*1 Hook
*2 Hog Ring
*3 Hog Ring Pliers


d.

Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.

NOTICE:

When installing the hog rings, avoid wrinkling the cover.



Hide 71511S 2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Separate Seat Type)

a.
B239183E02
2.333,0.281 2.177,0.281 2.177,0.281 1.677,1.677 false 2.354,0.198 2.594,0.396 0.24,0.198 10 false *1

Using hog ring pliers, install the separate type front seat cushion pad (occupant detection sensor) to the separate type front seat cushion cover with new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.



Text in Illustration
*1 Hog Ring Pliers


b.
B372265E02
2.01,2.479 1.875,2.479 1.875,2.479 1.833,2.833 false 2.042,2.406 2.323,2.635 0.281,0.229 10 false *1

Type A:

i.

Using hog ring pliers, connect the straps with new hog rings.

Text in Illustration
*1 Hog Ring Pliers



c.
B372267E03
2.292,1.51 2.99,1.51 true 3.01,1.417 3.208,1.604 0.198,0.188 10 false *1

Type B:

i.

Connect the straps with new tack pins.

Text in Illustration
*1 Tack Pin



Hide 3.INSTALL FRONT SEAT CUSHION COVER WITH PAD (for Bench Seat Type)

Hide 4.INSTALL FRONT SEAT CUSHION COVER WITH PAD (for Separate Seat Type)

Hide 73240 5.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Bench Seat Type)

Hide 73230 6.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Separate Seat Type)

Hide 71861 7.INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Separate Seat Type)

Hide 8.INSTALL FRONT SEAT CUSHION SHIELD RH (for Power Seat)

Hide 9.INSTALL FRONT SEAT CUSHION SHIELD RH (for Bench Seat Type)

Hide 71811D 10.INSTALL FRONT SEAT CUSHION SHIELD RH (for Manual Seat)

Hide 84921A 11.INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat)

Hide 84921B 12.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)

Hide 13.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Bench Seat Type)

Hide 72525A 14.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)

Hide 15.INSTALL FRONT SEAT ASSEMBLY RH

a.

for Manual Seat:

Install the front seat assembly RH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION).


b.

for Power Seat:

Install the front seat assembly RH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>INSTALLATION).


c.

for Bench Seat Type:

Install the front seat assembly RH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Bench Seat Type)>INSTALLATION).