Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for 5 Door) › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261150 REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for 5 Door) A

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY(for 5 Door)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 73370C 1.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

U148023E03
1.385,1.531 2.542,1.073 2.542,1.073 1.76,1.615 true 2.302,0.406 2.49,0.604 0.188,0.198 10 true A 0.771,1.927 0.958,2.135 0.188,0.208 10 true B 2.583,0.948 2.75,1.146 0.167,0.198 10 false a

NOTICE:

When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.


a.

Align the seat belt positioning holes with the claws and install the retractor of the seat belt with the 2 bolts as shown in the illustration.

HINT:

First install bolt A, and then install bolt B.


Torque:
for bolt A : 8.5 N*m (87 kgf*cm, 75 in.*lbf)
for bolt B : 42 N*m (428 kgf*cm, 31 ft.*lbf)


b.

Install the rear No. 1 seat outer belt shoulder anchor with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 72602B 2.INSTALL REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)

Hide 62520P 3.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

Hide 64740C 4.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

a.

w/o Rear No. 2 Seat:

i.

Pass the rear seatback lock control lever base through the deck trim side panel.


ii.

Attach the 5 clips and 8 claws to install the deck trim side panel.


iii.

Install the 4 bolts and 2 screws.


iv.

Attach the 6 claws and 2 guides to install the rear seatback lock control lever base to the deck trim side panel.


v.

Install the rear No. 1 seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



b.

w/ Rear No. 2 Seat:

i.

Attach the 4 clips and 8 claws to install the deck trim side panel.


ii.

Install the 2 bolts and 2 screws.


iii.

Install the rear No. 2 seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


iv.

Install the rear No. 1 seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



Hide 74603C 5.INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

Hide 74617A 6.INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

Hide 64712F 7.INSTALL FRONT DECK SIDE TRIM COVER LH (w/ Tonneau Cover)

Hide 64937A 8.INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

Hide 64725D 9.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 73233A 10.INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

Hide 58570C 11.INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

Hide 57412C 12.INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

Hide 57411D 13.INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

Hide 58574A 14.INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

Hide 58401A 15.INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

Hide 64717A 16.INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

Hide 62332C 17.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 67934 19.INSTALL QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

Hide 58371F 20.INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

Hide 21.INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Double-folding Seat Type LH Side)

Hide 22.INSTALL REAR NO. 2 SEAT ASSEMBLY LH

a.

for Manual Seat Type:

Install the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side)>INSTALLATION).


b.

for Power Seat Type:

Install the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side)>INSTALLATION).


c.

for Face to Face Seat Type:

Install the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type)>INSTALLATION).