Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
88650E
1.INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY
Attach the 2 claws to install the air conditioner amplifier assembly.
82877
2.INSTALL ECU INTEGRATION BOX RH
Install the ECU integration box RH with the 2 nuts and bolt.
Attach the clamp.
Connect the connectors.
87201B
3.INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY
55550
4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
55461A
5.INSTALL INSTRUMENT PANEL ORNAMENT
55317A
6.INSTALL INSTRUMENT SIDE PANEL RH
55607
7.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62111C
8.INSTALL COWL SIDE TRIM BOARD RH
67910
9.INSTALL DOOR SCUFF PLATE ASSEMBLY RH
10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).