Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM (except 5L-E) › from 2017.08
RM27T0E _58 Vehicle Interior _053731 THEFT DETERRENT / KEYLESS ENTRY _0329511 THEFT DETERRENT SYSTEM(except 5L-E) Y

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM(except 5L-E)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use this procedure to troubleshoot the theft deterrent system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS

Result:
Proceed to
NEXT



NEXT

3.READ OUT AND SAVE OPERATION HISTORY
3.READ OUT AND SAVE OPERATION HISTORY
NOTICE:
·

If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before operation history has been read out and saved, the operation history information could be lost.

·

The function "Read operation history" uses the current system time setting inside the GTS and the time counter inside the controlling ECU to calculate the timings shown in the operation history. For this reason, before reading out the operation history, first make sure that the GTS system clock is accurately set to the current time.




Result:
Proceed to
NEXT



NEXT

4.PRE-CHECK
4.PRE-CHECK
a.

Measure the battery voltage.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.


b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

5.SYMPTOM SIMULATION
5.SYMPTOM SIMULATION
Result:
Proceed to
NEXT



NEXT

6.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
6.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
a.

Use the GTS to check if the CAN communication system is functioning normally.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/ Central Gateway ECU)>DIAGNOSIS SYSTEM


Result:
Proceed to
CAN communication system DTC is not output
CAN communication system DTC is output



CAN communication system DTC is not output

7.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

CAN communication system DTC is output

7.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
a.

Use the GTS to check if the LIN communication system is functioning normally.

Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>DTC CHECK / CLEAR


Result:
Proceed to
LIN communication system DTC is not output
LIN communication system DTC is output



LIN communication system DTC is not output

8.CHECK POWER DOOR LOCK CONTROL SYSTEM

LIN communication system DTC is output

8.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Refer to the power door lock control system.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>OPERATION CHECK


Result:
Proceed to
Power door lock control system is normal
Power door lock control system is abnormal



Power door lock control system is normal

9.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

Power door lock control system is abnormal

9.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

Result:
Result Proceed to
Wireless door lock control system is normal A
Wireless door lock control system is abnormal B



A

10.CHECK ENTRY AND START SYSTEM (for Entry Function) (w/ Entry and Start System)

B

10.CHECK ENTRY AND START SYSTEM (for Entry Function) (w/ Entry and Start System)
a.

Result:
Proceed to
Entry and start system (for Entry Function) is normal
Entry and start system (for Entry Function) is abnormal



Entry and start system (for Entry Function) is normal

11.CHECK ENTRY AND START SYSTEM (for Start Function) (w/ Entry and Start System)

Entry and start system (for Entry Function) is abnormal

11.CHECK ENTRY AND START SYSTEM (for Start Function) (w/ Entry and Start System)
a.

Result:
Proceed to
Entry and start system (for Start Function) is normal
Entry and start system (for Start Function) is abnormal



Entry and start system (for Start Function) is normal

12.CHECK LIGHTING SYSTEM (EXT)

Entry and start system (for Start Function) is abnormal

12.CHECK LIGHTING SYSTEM (EXT)

Result:
Proceed to
Lighting system (EXT) is normal
Lighting system (EXT) is abnormal



Lighting system (EXT) is normal

13.CHECK LIGHTING SYSTEM (INT)

Lighting system (EXT) is abnormal

13.CHECK LIGHTING SYSTEM (INT)

Result:
Proceed to
Lighting system (INT) is normal
Lighting system (INT) is abnormal



Lighting system (INT) is normal

14.CHECK GLASS HATCH OPENER SYSTEM (w/ Glass Hatch Opener System)

Lighting system (INT) is abnormal

14.CHECK GLASS HATCH OPENER SYSTEM (w/ Glass Hatch Opener System)
a.

Refer to the glass hatch opener system.

Click hereVehicle Exterior>WINDOW / GLASS>GLASS HATCH OPENER SYSTEM>OPERATION CHECK


Result:
Proceed to
Glass hatch opener system is normal
Glass hatch opener system is abnormal



Glass hatch opener system is normal

15.CHECK HORN SYSTEM

Glass hatch opener system is abnormal

15.CHECK HORN SYSTEM
a.

Refer to the horn system.

Click hereVehicle Exterior>HORN>HORN SYSTEM>PROBLEM SYMPTOMS TABLE


Result:
Proceed to
Horn system is normal
Horn system is abnormal



Horn system is normal

16.CHECK FOR DTC*

Horn system is abnormal

16.CHECK FOR DTC*
a.

Check for DTCs.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>THEFT DETERRENT SYSTEM (except 5L-E)>DTC CHECK / CLEAR

Body Electrical > Main Body > Trouble Codes
50001 123

Result:
Proceed to
DTCs are not output
Theft deterrent system DTCs are output



DTCs are not output

17.PROBLEM SYMPTOMS TABLE

Theft deterrent system DTCs are output

17.PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in Problem Symptoms Table (Fault can be simulated) A
Fault is not listed in Problem Symptoms Table (Fault can not be simulated) B
Fault is listed in Problem Symptoms Table C



A

18.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM*

B

C

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

18.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM*

NEXT

19.ADJUST, REPAIR OR REPLACE
19.ADJUST, REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

20.CONFIRMATION TEST
20.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END