Tilt and Telescopic Manual Switch Circuit
Circuit diagnosis · Vehicles built from Sep 2011
DESCRIPTION
The signals generated by operating the manual switch are sent to the multiplex tilt and telescopic ECU through the serial line.INSPECTION PROCEDURE
| 1. READ VALUE USING INTELLIGENT TESTER (TILT AND TELESCOPIC MANUAL SWITCH) |
Use the Data List to check if the tilt and telescopic manual switch is functioning properly.
Tilt & Telescopic Tester Display
Measurement Item/Range
Normal Condition
Normal Condition
Tilt Up switch
Input state of tilt up by manual switch/ON or OFF
ON: Tilt up activated by manual switch
OFF: Tilt up not activated by manual switch
-
Tilt Down Switch
Input state of tilt down by manual switch/ON or OFF
ON: Tilt down activated by manual switch
OFF: Tilt down not activated by manual switch
-
Telesco Short Switch
Input state of telescopic short by manual switch/ON or OFF
ON: Telescopic short activated by manual switch
OFF: Telescopic short not activated by manual switch
-
Telesco Long Switch
Input state of telescopic long by manual switch/ON or OFF
ON: Telescopic long activated by manual switch
OFF: Telescopic long not activated by manual switch
-
| Result |
Proceed to |
| "ON" is displayed on the intelligent tester screen when each switch is turned on. "OFF" is displayed on the intelligent tester screen when each switch is turned off. |
A |
| "ON" is not displayed on the intelligent tester screen when each switch is turned on. "OFF" is not displayed on the intelligent tester screen when each switch is turned off. |
B |
|
|
||||
| A | ||
| ||
