2011-2013 Land Cruiser · Service Manual Brake

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


WARNING LIGHT CHECK
  1. Release the parking brake lever.

    NOTICE:
    When releasing the parking brake, set chocks to hold the vehicle for safety.

    HINT:
    When the parking brake is applied or the level of the brake fluid is low, the brake warning light comes on.

  2. When the ignition switch is turned to ON, check that the ABS and brake warning lights turn on and then turn off after the engine starts.
    If a light remains on, proceed to troubleshooting for the light circuit below.

    Trouble Area
    See Procedure
    ABS warning light circuit
    Click here
    Brake warning light circuit
    Click here

← DIAGNOSIS SYSTEM (Sep 2011 – Dec 2011)DTC CHECK / CLEAR (Sep 2011 – Dec 2011) →