2011-2013 Land Cruiser · Service Manual Brake

INSTALLATION

Removal / installation · Vehicles built from Sep 2011


1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
  1. Install the parking brake switch with the screw.

    Torque:
    0.9 N*m{ 9 kgf*cm , 8 in.*lbf }


2. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

  1. C226756
    Install the parking brake lever with the 2 bolts.

    Torque:
    25 N*m{ 255 kgf*cm , 18 ft.*lbf }

  1. Install the parking brake lever support with the 2 bolts.

    Torque:
    25 N*m{ 255 kgf*cm , 18 ft.*lbf }

  1. Install the straight pin to the parking brake lever.

  1. C226757
    Connect the No. 2 parking brake cable and No. 3 parking brake cable to the No. 1 parking brake pull rod.

  1. C170906
    Install the bush, compression spring and No. 1 parking brake pull rod to the parking brake lever with the adjusting nut.

  1. Install the parking brake return spring.

  1. Connect the parking brake switch connector.


3. ADJUST PARKING BRAKE
(Click here)

4. INSTALL LOWER CONSOLE BOX (w/o Console Box Lid)
(Click here)

5. INSTALL COOLING BOX ASSEMBLY (w/ Cool Box)
(Click here)

6. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)
(Click here)
← REMOVAL (from Sep 2011)COMPONENTS (from Sep 2011) →