89422C
1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
Install a new gasket to the sensor.
Using a 19 mm deep socket wrench, install the sensor.
Connect the sensor connector.
2.ADD ENGINE COOLANT
3.INSPECT FOR COOLANT LEAK
51405A
4.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
53805
5.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
53806
6.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
12601E
7.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)