Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › IGNITION COIL AND SPARK PLUG
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255011 IGNITION COIL AND SPARK PLUG A

1GR-FE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  INSTALLATION  


PROCEDURE

Hide 19100P 1.INSTALL SPARK PLUG

a.

Install the 6 spark plugs.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 19500 2.INSTALL IGNITION COIL ASSEMBLY

a.

Install the 6 ignition coils with the 6 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the 6 ignition coil connectors.


Hide 25702B 3.INSTALL NO. 2 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

Hide 17362 4.INSTALL NO. 2 AIR TUBE (w/ Secondary Air Injection System)

Hide 25701B 5.INSTALL NO. 1 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

Hide 17361 6.INSTALL AIR TUBE (w/ Secondary Air Injection System)

Hide 8.INSTALL AIR CLEANER CAP AND HOSE

a.
A456910C01
0.979,2.5 1.146,2.5 1.146,2.5 1.563,2.708 false 1.604,2.698 1.979,2.406 1.979,2.406 2.063,2.406 false 1.115,2.156 1.271,2.354 0.156,0.198 10 false A 0.771,2.406 1.083,2.604 0.313,0.198 10 false *a 2.146,2.333 2.458,2.531 0.313,0.198 10 false *b 2.115,1.49 2.271,1.688 0.156,0.198 10 true A
*a Protrusion (Hose)
*b Protrusion (Throttle body)


Install the air cleaner cap and hose.

i.

Install the air cleaner cap and hose with the bolt and fasten the 4 hook clamps.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


ii.

Attach the clamp and connect the No. 2 PCV hose, vacuum hose and mass air flow meter connector.

HINT:

The direction of the hose clamp is indicated in the illustration.



iii.
A456909C01
2.615,2.385 3.073,2.583 0.458,0.198 10 false (A) 1,2.24 1.313,2.438 0.313,0.198 10 false *a 1.469,2.698 1.781,2.896 0.313,0.198 10 false *b 2.146,1.521 2.302,1.719 0.156,0.198 10 true B 0.365,2.271 0.521,2.469 0.156,0.198 10 false B 0.323,2.708 0.781,2.906 0.458,0.198 10 false 90°
*a Top
*b Front


Tighten the hose clamp so that it is within the standard.

(A):

15 mm or less