Home › Engine / Hybrid System › 1VD-FTV (ENGINE MECHANICAL) › DRIVE BELT
RM2660E _51 Engine / Hybrid System _052779 1VD-FTV ENGINE MECHANICAL _0255067 DRIVE BELT A

1VD-FTV ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 53806 1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53292A 4.REMOVE UPPER RADIATOR SUPPORT SEAL

Hide 12601E 5.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)

Hide 9.REMOVE V-RIBBED BELT (w/ Viscous Heater)

a.
A174847

Loosen the lock nut and turn the bolt counterclockwise.


b.

Remove the V-ribbed belt.


Hide 10.REMOVE NO. 1 IDLER PULLEY (w/ Viscous Heater)

a.
A177430

Remove the bolt, cover, No. 1 idler pulley and collar.


Hide 11.REMOVE NO. 3 IDLER PULLEY (w/ Viscous Heater)

a.
A177431

Remove the nut and No. 3 idler pulley.


Hide 16361A 12.REMOVE V-RIBBED BELT

a.
A174849

Using a wrench to the V-ribbed belt tensioner bracket, turn the wrench clockwise and remove the V-ribbed belt.