23280
1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the pressure regulator.
Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.
When inserting the injector, be careful not to damage the O-ring.
While turning the pressure regulator left and right, install it to the delivery pipe.
Install the 2 bolts.
Connect the vacuum sensing hose to the pressure regulator.
Connect the No. 2 fuel tube to the pressure regulator (See page Engine / Hybrid System>3UR-FE (FUEL)>FUEL SYSTEM>PRECAUTION).
17880
2.INSTALL AIR CLEANER HOSE ASSEMBLY
11209
3.INSTALL V-BANK COVER SUB-ASSEMBLY
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
5.INSPECT FOR FUEL LEAK