Home › Engine / Hybrid System › 1UR-FE (INTAKE / EXHAUST) › EXHAUST PIPE
RM2660E _51 Engine / Hybrid System _052788 1UR-FE INTAKE / EXHAUST _0255160 EXHAUST PIPE A

1UR-FE INTAKE / EXHAUST  EXHAUST PIPE  INSTALLATION  


PROCEDURE

Hide 17410 1.INSTALL FRONT EXHAUST PIPE ASSEMBLY

a.

Install a new gasket and the front exhaust pipe to the exhaust manifold with the 2 nuts.

Torque:
54 N*m (554 kgf*cm, 40 ft.*lbf)


Hide 17450B 2.INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY

a.

Install a new gasket and the front No. 2 exhaust pipe to the exhaust manifold LH with the 2 nuts.

Torque:
54 N*m (554 kgf*cm, 40 ft.*lbf)


Hide 17420 3.INSTALL CENTER EXHAUST PIPE ASSEMBLY

a.

Install 2 new gaskets to the center exhaust pipe.


b.

Connect the center exhaust pipe to the 3 exhaust pipe supports.


c.

Install the center exhaust pipe with the 4 bolts.

Torque:
48 N*m (489 kgf*cm, 35 ft.*lbf)


Hide 17581A 4.INSTALL EXHAUST PIPE DAMPER

a.

Install the exhaust pipe damper and No. 4 exhaust pipe upper protector with the 2 bolts.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


Hide 17430 5.INSTALL TAILPIPE ASSEMBLY

a.

Install a new gasket to the center exhaust pipe.


b.

Install the tailpipe to the 2 exhaust pipe supports.


c.
A272719E02
1.385,0.219 1.563,0.375 0.177,0.156 10 false *a 0.479,1.073 0.656,1.229 0.177,0.156 10 false *b 2.271,0.229 2.531,0.375 0.26,0.146 10 false 30° 2.573,0.771 2.833,0.917 0.26,0.146 10 false 30°

Install a new clamp.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)

Text in Illustration
*a Top
*b LH Side

HINT:

Install the clamp within the angle range shown in the illustration.



Hide 89465 6.INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

Hide 89465 7.INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)