Home › Engine / Hybrid System › 1GR-FE (COOLING) › WATER PUMP
RM2660E _51 Engine / Hybrid System _052792 1GR-FE COOLING _0255184 WATER PUMP A

1GR-FE COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

a.
A223007E03
1.177,1.719 1.344,1.906 0.167,0.188 10 true B 2.281,1.552 2.448,1.76 0.167,0.208 10 true B 0.75,1.813 0.917,2 0.167,0.188 10 true C 2.469,1.656 2.635,1.833 0.167,0.177 10 true B 0.354,1.844 0.51,2.031 0.156,0.188 10 true C 2.74,0.146 2.896,0.323 0.156,0.177 10 true B 1.531,1.875 1.688,2.052 0.156,0.177 10 true C 1.552,0.427 1.729,0.604 0.177,0.177 10 true B 2.063,1.875 2.219,2.063 0.156,0.188 10 true C 1.042,0.469 1.208,0.667 0.167,0.198 10 true B 2.708,1.75 2.854,1.917 0.146,0.167 10 true C 0.063,0.635 0.24,0.802 0.177,0.167 10 true A 0.594,0.5 0.74,0.667 0.146,0.167 10 true B 3.229,1.26 3.406,1.438 0.177,0.177 10 true C 3.094,0.552 3.24,0.729 0.146,0.177 10 true A 2.708,0.583 2.854,0.75 0.146,0.167 10 true B 1.323,0.521 1.479,0.688 0.156,0.167 10 true C

Install a new gasket and the engine water pump with the 17 bolts.

Torque:
for bolt A : 47 N*m (479 kgf*cm, 35 ft.*lbf)
for bolt B : 11 N*m (112 kgf*cm, 8 ft.*lbf)
for bolt C : 23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 16620 2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

Hide 44310 3.CONNECT VANE PUMP ASSEMBLY

a.

Connect the vane pump with the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


b.

Attach the wire harness clamp.


c.

Connect the connector.


Hide 16604 4.INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

a.

Install the 2 No. 2 idler pulleys with the 2 bolts.

Torque:
54 N*m (551 kgf*cm, 40 ft.*lbf)


Hide 16323 5.INSTALL WATER INLET HOUSING

A223008

a.

Install a new O-ring to the water outlet pipe.


b.

Install a new gasket to the water pump.


c.

Apply soapy water to the gasket of the water outlet pipe.


d.

Install the water inlet with the 5 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


e.

Connect the 5 water by-pass hoses.


f.

Connect the oil cooler hose.


g.

Connect the No. 2 oil cooler hose.


h.

Connect the throttle body connector.


Hide 6.CONNECT AIR TUBE ASSEMBLY (w/ Secondary Air Injection System)

a.

Connect the air tube with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 32907A 8.CONNECT OIL COOLER TUBE (w/ Air Cooled Transmission Oil Cooler)

Hide 16571C 10.INSTALL NO. 1 RADIATOR HOSE

Hide 51405A 14.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53806 15.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 16.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH