52119A
1.REMOVE FRONT BUMPER COVER (for Standard)
52119A
2.REMOVE FRONT BUMPER COVER (w/ Winch)
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
4.DRAIN ENGINE COOLANT
11259
5.REMOVE V-BANK COVER
32917
6.REMOVE TRANSMISSION OIL COOLER AIR DUCT (w/ Air Cooled Transmission Oil Cooler)
Remove the 4 bolts and oil cooler air duct.
53293C
7.REMOVE RADIATOR SIDE DEFLECTOR RH (w/o Air Cooled Transmission Oil Cooler)
Using a clip remover, remove the 4 clips and move the side deflector so that the radiator can be removed in a later step.
53294C
8.REMOVE RADIATOR SIDE DEFLECTOR LH
Using a clip remover, remove the 4 clips and move the side deflector so that the radiator can be removed in a later step.
16571C
9.REMOVE NO. 1 RADIATOR HOSE
16572D
10.REMOVE NO. 2 RADIATOR HOSE
Detach the clamp and remove the No. 2 radiator hose.
32907A
11.DISCONNECT OIL COOLER TUBE (w/ Air Cooled Transmission Oil Cooler)
Detach the claw to open the flexible hose clamp, and then remove the 2 bolts to disconnect the oil cooler tube from the fan shroud.
16711
12.REMOVE FAN SHROUD
Loosen the 4 nuts holding the fluid coupling fan.
Remove the fan and generator V-belt (See page Engine / Hybrid System>1GR-FE (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL).
Disconnect the reservoir hose from the upper side of the radiator tank.
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.
Be careful not to damage the radiator core.
Remove the fan pulley from the water pump.
32921D
13.DISCONNECT INLET OIL COOLER HOSE (for Automatic Transmission)
Disconnect the oil cooler hose.
32922A
14.DISCONNECT OUTLET OIL COOLER HOSE (for Automatic Transmission)
Disconnect the oil cooler hose.
16400
15.REMOVE RADIATOR ASSEMBLY
Remove the 4 bolts and radiator.