Home › Engine / Hybrid System › 3UR-FE (COOLING) › THERMOSTAT
RM2660E _51 Engine / Hybrid System _052793 3UR-FE COOLING _0255190 THERMOSTAT A

3UR-FE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16031 1.INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

a.

Install a new gasket and the water inlet with thermostat with the 3 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.
A384667E01
1,2.542 1.313,2.74 0.313,0.198 10 false *a 1.833,3.01 2.146,3.208 0.313,0.198 10 false *b

Connect the No. 5 water by-pass hose.

Text in Illustration
*a RH Side
*b Front

HINT:

Install the hose so that the direction of the hose clamp is as indicated in the illustration.



Hide 16572D 3.INSTALL NO. 2 RADIATOR HOSE

Hide 16571C 4.INSTALL NO. 1 RADIATOR HOSE

Hide 51405A 10.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53806 11.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 12.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH