Home › Engine / Hybrid System › 3UR-FE (COOLING) › THERMOSTAT
RM2660E _51 Engine / Hybrid System _052793 3UR-FE COOLING _0255190 THERMOSTAT A

3UR-FE COOLING  THERMOSTAT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

If the thermostat is not installed, cooling efficiency decreases. Even if the engine tends to overheat, do not remove the thermostat.


PROCEDURE

Hide 53806 1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 16571C 8.REMOVE NO. 1 RADIATOR HOSE

Hide 16572D 9.REMOVE NO. 2 RADIATOR HOSE

Hide 16031 11.REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

a.
A238833E02
0.659,1.685 0.842,1.846 0.183,0.161 10 *1 1.785,0.941 0.76,1.564 false 0.76,1.564 0.76,1.664 false

Disconnect the No. 5 water by-pass hose.

Text in Illustration
*1 No. 5 Water By-pass Hose


b.
A151841

Remove the 3 nuts, water inlet with thermostat and gasket.