53806
1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
53805
2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
51442
4.REMOVE NO. 2 ENGINE UNDER COVER
5.DRAIN ENGINE OIL
32907A
6.DISCONNECT OIL COOLER PIPE ASSEMBLY
89491
7.REMOVE ENGINE OIL LEVEL SENSOR
Disconnect the oil level sensor connector.
Remove the 4 bolts and oil level sensor.
| *1 | Cutting Position |
| *2 | Supply Part |
Cut off the gasket as shown in the illustration.
Remove the gasket from the oil level sensor.
After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.