53806
1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
53805
2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
51442
4.REMOVE NO. 2 ENGINE UNDER COVER
Remove the 2 bolts and No. 2 engine under cover.
5.DRAIN ENGINE OIL
32907A
6.DISCONNECT OIL COOLER TUBE
Remove the 2 bolts and disconnect the oil cooler tube.
89491
7.REMOVE ENGINE OIL LEVEL SENSOR
Disconnect the oil level sensor connector.
Remove the 4 bolts and oil level sensor.
Cut away part of the gasket and remove the gasket from the engine oil level sensor.
| *1 | Cutting Position |
| *2 | Supply Part |
Remove the only the outer part of the gasket.