Home › Engine / Hybrid System › 1VD-FTV (LUBRICATION) › ENGINE OIL COOLER
RM2660E _51 Engine / Hybrid System _052799 1VD-FTV LUBRICATION _0255226 ENGINE OIL COOLER A

1VD-FTV LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.
A170279

Apply a light coat of engine oil to 2 new O-rings and a new oil cooler gasket, and set them to the oil cooler.


b.
A170278

Install the oil cooler with the 2 bolts and 2 nuts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 51405A 6.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53805 7.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 53808A 8.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH