53782
1.REMOVE FRONT FENDER APRON SEAL FRONT RH
53784
2.REMOVE FRONT FENDER APRON SEAL REAR RH
53806
3.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
53805
4.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
51405A
5.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
51442
6.REMOVE NO. 2 ENGINE UNDER COVER
52521
7.REMOVE FRONT UPPER CENTER BUMPER RETAINER
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Standard)>REMOVAL)
w/ Winch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Winch)>REMOVAL)
32943
8.DISCONNECT TRANSMISSION OIL COOLER HOSE
Disconnect the 2 transmission oil cooler hoses.
32941
9.DISCONNECT INLET NO. 1 OIL COOLER HOSE AND OUTLET NO. 1 OIL COOLER HOSE
| *A | for 1VD-FTV | *B | for 1UR-FE |
Detach the claw to open the flexible hose clamp.
Disconnect the inlet and outlet oil cooler hoses.
32941A
10.DISCONNECT INLET NO. 2 OIL COOLER HOSE AND INLET NO. 3 OIL COOLER HOSE
| *A | for 1VD-FTV | *B | for 1UR-FE |
Disconnect the 2 inlet oil cooler hoses.
32941H
11.DISCONNECT INLET NO. 4 OIL COOLER HOSE
32907A
12.REMOVE OIL COOLER TUBE
| *A | for 1VD-FTV | *B | for 1UR-FE, |
Remove the 2 bolts and oil cooler tube.
32917
13.REMOVE TRANSMISSION OIL COOLER AIR DUCT
Remove the 4 bolts and transmission oil cooler air duct.
32910
14.REMOVE OIL COOLER ASSEMBLY
Remove the 4 bolts and oil cooler.
Remove the 5 bolts and rear transmission oil cooler air duct.
Disconnect the oil cooler inlet hose and outlet hose and remove the tube.