53782
1.REMOVE FRONT FENDER APRON SEAL FRONT RH
53784
2.REMOVE FRONT FENDER APRON SEAL REAR RH
53806
3.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
53805
4.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
51405A
5.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
51442
6.REMOVE NO. 2 ENGINE UNDER COVER
52521
7.REMOVE FRONT UPPER CENTER BUMPER RETAINER
for Standard: (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Standard)>REMOVAL)
w/ Winch: (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Winch)>REMOVAL)
32942
8.REMOVE OUTLET NO. 1 OIL COOLER HOSE
Detach the claw to open the flexible hose clamp.
| *1 | Outlet No. 1 Oil Cooler Hose |
| *2 | Inlet No. 1 Oil Cooler Hose |
Slide the 2 clips and remove the outlet No. 1 oil cooler hose.
32941
9.REMOVE INLET NO. 1 OIL COOLER HOSE
Slide the 2 clips and remove the inlet No. 1 oil cooler hose.
32941A
10.REMOVE INLET NO. 2 OIL COOLER HOSE
Slide the 2 clips and remove the inlet No. 2 oil cooler hose.
| *1 | Inlet No. 2 Oil Cooler Hose |
| *2 | Inlet No. 3 Oil Cooler Hose |
32941G
11.REMOVE INLET NO. 3 OIL COOLER HOSE
Slide the 2 clips and remove the inlet No. 3 oil cooler hose.
32941H
12.REMOVE INLET NO. 4 OIL COOLER HOSE
Slide the 2 clips and remove the inlet No. 4 oil cooler hose.
32907A
13.REMOVE OIL COOLER TUBE
Remove the 2 bolts and oil cooler tube.
32917
14.REMOVE TRANSMISSION OIL COOLER AIR DUCT
Remove the 4 bolts and transmission oil cooler air duct.
32910
15.REMOVE OIL COOLER ASSEMBLY
Remove the 4 bolts and oil cooler assembly.
Remove the bolt and disconnect the air cooled oil cooler tube from the rear transmission oil cooler air duct.
Remove the 4 bolts and rear transmission oil cooler air duct.
Slide the 2 clips and remove the air cooled oil cooler tube.
| *1 | Air Cooled Oil Cooler Tube |
| *2 | Oil Cooler Inlet Hose |
| *3 | Oil Cooler Outlet Hose |
Slide the clip and remove the oil cooler inlet hose.
Slide the clip and remove the oil cooler outlet hose.