37110
1.REMOVE PROPELLER SHAFT ASSEMBLY
33309C
2.REMOVE REAR OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY
36115C
3.REMOVE TRANSFER CASE REAR OIL SEAL
Using SST, tap out the oil seal.
Be careful not to damage the oil seal and rear transfer case contact surface.
36115C
4.INSTALL TRANSFER CASE REAR OIL SEAL
Apply transfer oil to the spline of the output shaft.
Using SST and a hammer, tap in a new oil seal until its surface is flush with the housing upper surface.
33309C
5.INSTALL REAR OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY
37110
6.INSTALL PROPELLER SHAFT ASSEMBLY