Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
53806
1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
53805
2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
51442
4.REMOVE NO. 2 ENGINE UNDER COVER
5.DRAIN DIFFERENTIAL OIL
6.REMOVE FRONT AXLE ASSEMBLY LH
43420
7.REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
Using SST, remove the drive shaft.
Be careful not to damage the dust cover and oil seal.