Home › Suspension › SUSPENSION CONTROL › ACTIVE HEIGHT CONTROL SUSPENSION › from 2015.08
RM2660E _53 Suspension _052813 SUSPENSION CONTROL _0255367 ACTIVE HEIGHT CONTROL SUSPENSION C

SUSPENSION CONTROL  ACTIVE HEIGHT CONTROL SUSPENSION  C1741  Front Height Control Solenoid Valve RH Circuit Malfunction  C1742  Front Height Control Solenoid Valve LH Circuit Malfunction  C1743  Rear Height Control Solenoid Valve RH Circuit Malfunction  C1744  Rear Height Control Solenoid Valve LH Circuit Malfunction  C1753  Accumulator Solenoid Valve Malfunction  C1754  Front Gate Solenoid Valve Malfunction  C1755  Rear Gate Solenoid Valve Malfunction  


DESCRIPTION

The control valve solenoid assembly consists of each front and rear leveling valve, gate valve and accumulator valve. It performs the height control and connects and disconnects the fluid line of the right and left shock absorber by operating the solenoid valve with the control signal from the ECU.

DTC Code Detection Condition Trouble Area
C1741 When either of the following is detected:
·

With the front leveling valve RH not activated, an open signal of the front leveling valve RH is detected for 1 second or more.

·

With the front leveling valve RH activated, a short signal of the front leveling valve RH is detected 8 times successively.


·

Harness or connector

·

No. 1 height control valve

·

Suspension control ECU

·

Each front suspension control valve (Each front spring rate switching valve)


C1742 When either of the following is detected:
·

With the front leveling valve LH not activated, an open signal of the front leveling valve LH is detected for 1 second or more.

·

With the front leveling valve LH activated, a short signal of the front leveling valve LH is detected 8 times successively.


·

Harness or connector

·

No. 1 height control valve

·

Suspension control ECU

·

Each front suspension control valve (Each front spring rate switching valve)


C1743 When either of the following is detected:
·

With the rear leveling valve RH not activated, an open signal of the rear leveling valve RH is detected for 1 second or more.

·

With the rear leveling valve RH activated, a short signal of the rear leveling valve RH is detected 8 times successively.


·

Harness or connector

·

No. 1 height control valve

·

Suspension control ECU

·

Each front suspension control valve (Each front spring rate switching valve)


C1744 When either of the following is detected:
·

With the rear leveling valve LH not activated, an open signal of the rear leveling valve LH is detected for 1 second or more.

·

With the rear leveling valve LH activated, a short signal of the rear leveling valve LH is detected 8 times successively.


·

Harness or connector

·

No. 1 height control valve

·

Suspension control ECU

·

Each front suspension control valve (Each front spring rate switching valve)


C1753 When either of the following is detected:
·

With the accumulator valve not activated, an open signal of the accumulator valve is detected for 1 second or more.

·

With the accumulator valve activated, a short signal of the accumulator valve is detected 8 times successively.


·

Harness or connector

·

No. 1 height control valve

·

Suspension control ECU

·

Each front suspension control valve (Each front spring rate switching valve)


C1754 When either of the following is detected:
·

With the front gate valve not activated, an open signal of the front gate valve is detected for 1 second or more.

·

With the front gate valve activated, a short signal of the front gate valve is detected 8 times successively.


·

Harness or connector

·

No. 1 height control valve

·

Suspension control ECU

·

Each front suspension control valve (Each front spring rate switching valve)


C1755 When either of the following is detected:
·

With the rear gate valve not activated, an open signal of the rear gate valve is detected for 1 second or more.

·

With the rear gate valve activated, a short signal of the rear gate valve is detected 8 times successively.


·

Harness or connector

·

No. 1 height control valve

·

Suspension control ECU

·

Each front suspension control valve (Each front spring rate switching valve)



WIRING DIAGRAM

C177456E07
6.031,1.313 6.448,1.469 0.417,0.156 10 false SLRR 6.031,2.063 6.448,2.219 0.417,0.156 10 false SLRL 6.031,0.896 6.448,1.052 0.417,0.156 10 false SLFL 6.031,0.49 6.448,0.646 0.417,0.156 10 false SLFR 6.031,2.438 6.448,2.594 0.417,0.156 10 false SLRG 6.031,1.688 6.448,1.865 0.417,0.177 10 false SLAC 6.031,2.927 6.531,3.115 0.5,0.188 10 false SLFG 2.667,1.292 3.083,1.448 0.417,0.156 10 false SLRR 2.667,2.063 3.083,2.219 0.417,0.156 10 false SLRL 2.667,0.885 3.083,1.042 0.417,0.156 10 false SLFL 2.667,0.5 3.083,0.656 0.417,0.156 10 false SLFR 2.667,2.427 3.083,2.583 0.417,0.156 10 false SLRG 2.667,1.688 3.083,1.865 0.417,0.177 10 false AHC- 2.667,2.948 3.167,3.135 0.5,0.188 10 false SLFG 6.01,3.979 6.615,4.208 0.604,0.229 10 false SLB 5.313,4.469 5.594,4.625 0.281,0.156 10 false K36 5.313,4.625 6.896,4.781 1.583,0.156 10 false Suspension Control ECU 2.281,2.438 2.594,2.615 0.313,0.177 10 false SLB 1.76,3.427 3.458,3.667 1.698,0.24 10 false No. 1 Height Control Valve 1.76,3.219 2,3.406 0.24,0.188 10 false N4 2.604,5.135 5.094,5.5 2.49,0.365 10 false Front Spring Rate Switching Valve RH 2.604,4.99 2.969,5.156 0.365,0.167 10 false N10 2.635,6.792 5.125,7.156 2.49,0.365 10 false Front Spring Rate Switching Valve LH 2.635,6.656 3,6.823 0.365,0.167 10 false N12 5.729,0.375 5.885,0.573 0.156,0.198 10 false 7 5.719,0.781 5.885,0.969 0.167,0.188 10 false 8 5.708,1.188 5.844,1.375 0.135,0.188 10 false 9 5.646,1.594 5.844,1.76 0.198,0.167 10 false 10 5.667,1.948 5.896,2.146 0.229,0.198 10 false 22 5.667,2.344 5.885,2.521 0.219,0.177 10 false 29 5.656,2.844 5.854,3.01 0.198,0.167 10 false 30 5.708,3.865 5.875,4.031 0.167,0.167 10 false 1 3.24,1.188 3.385,1.354 0.146,0.167 10 false 1 3.24,1.938 3.344,2.146 0.104,0.208 10 false 2 3.24,0.792 3.396,0.99 0.156,0.198 10 false 3 3.24,0.406 3.396,0.573 0.156,0.167 10 false 4 3.24,2.313 3.375,2.531 0.135,0.219 10 false 5 2.042,2.542 2.167,2.708 0.125,0.167 10 false 6 3.24,1.583 3.344,1.802 0.104,0.219 10 false 7 3.24,2.802 3.344,3 0.104,0.198 10 false 8 3.156,4.688 3.479,4.854 0.323,0.167 10 false SLB 2.885,4.594 3,4.76 0.115,0.167 10 false 2 3.125,6.323 3.448,6.49 0.323,0.167 10 false SLB 2.844,6.229 2.958,6.396 0.115,0.167 10 false 2

CAUTION / NOTICE / HINT

NOTICE:
·

Before performing troubleshooting, inspect the connectors of related circuits.

·

If the suspension control ECU or height control sensor is replaced, the vehicle height offset calibration must be performed (See page Suspension>SUSPENSION CONTROL>ACTIVE HEIGHT CONTROL SUSPENSION>INITIALIZATION).



HINT:

Power is supplied to the No. 1 height control valve and front suspension control valve from the suspension control ECU. If a short occurs in the power supply circuit in the front suspension control valve, DTC C1741, C1742, C1743, C1744, C1753, C1754 and/or C1755 will be stored. In this case, DTC C1736 and/or C1737 will also be stored.


PROCEDURE

1.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (NO. 1 HEIGHT CONTROL VALVE)
a.

Connect the intelligent tester to the DLC3.


b.

Start the engine and turn the tester on.


c.

Select the Active Test mode on the intelligent tester.


d.

Check the operation of the leveling valve solenoid, accumulator valve solenoid and gate valve solenoid when operating the solenoid with the intelligent tester.

AHC
Tester Display Test Part Control Range Diagnostic Note
Front Right Height Solenoid Front height control solenoid valve RH ON or OFF Operation of solenoid can be heard.
Front Left Height Solenoid Front height control solenoid valve LH ON or OFF Operation of solenoid can be heard.
Rear Right Height Solenoid Rear height control solenoid valve RH ON or OFF Operation of solenoid can be heard.
Rear Left Height Solenoid Rear height control solenoid valve LH ON or OFF Operation of solenoid can be heard.
Accumulator Valve Accumulator solenoid valve ON or OFF Operation of solenoid can be heard.
Front Gate Valve Front gate solenoid valve ON or OFF When the Front Gate Valve item of the Active Test is operated, the Front Gate Valve item of the Data List changes to ON/OFF.
Rear Gate Valve Rear gate solenoid valve ON or OFF When the Rear Gate Valve item of the Active Test is operated, the Rear Gate Valve item of the Data List changes to ON/OFF.

OK:

The leveling valve solenoid, accumulator solenoid and/or gate valve solenoid operates.




OK

2.RECONFIRM DTC OUTPUT

NG

3.CHECK HARNESS AND CONNECTOR (NO. 1 HEIGHT CONTROL VALVE - SUSPENSION CONTROL ECU)
2.RECONFIRM DTC OUTPUT

b.

Perform a road test.


c.

Check for DTCs.

Result
Result Proceed to
DTC is output A
DTC is not output B



A

REPLACE SUSPENSION CONTROL ECU

B

3.CHECK HARNESS AND CONNECTOR (NO. 1 HEIGHT CONTROL VALVE - SUSPENSION CONTROL ECU)
a.

Disconnect the N4 No. 1 height control valve connector.


b.

Disconnect the K36 ECU connector.

U164797E02
1.656,2.813 2.063,2.76 false 1.375,2.833 2.042,2.365 false 1.333,2.823 2.031,2.01 false 1.281,2.823 1.125,2.01 1.125,2.01 0.979,1.99 false 1.219,2.802 1.021,2.469 false 1.208,2.885 1.021,2.885 false 1.24,2.938 2.063,3.302 false 1.198,2.938 1.198,3.333 false 5.26,1.844 4.479,1.844 false 5.427,1.792 4.802,1.167 4.802,1.167 4.448,1.167 false 5.625,1.802 6.229,1.208 6.229,1.208 6.604,1.208 false 5.813,1.844 6.656,1.823 false 5.271,2.042 4.74,2.563 4.74,2.563 4.49,2.563 false 5.417,2.031 5.135,2.688 5.135,2.688 5.135,2.802 false 5.635,2.021 5.781,2.688 5.781,2.688 5.781,2.802 false 5.792,2.021 6.354,2.573 6.354,2.573 6.646,2.573 false 0.594,0.073 2.958,0.427 2.365,0.354 10 false Rear view of wire harness connector: (to Suspension Control ECU) 2.094,2.271 2.719,2.469 0.625,0.198 10 false 7 (SLFR) 2.073,1.906 2.719,2.094 0.646,0.188 10 false 8 (SLFL) 0.344,1.885 1.01,2.073 0.667,0.188 10 false 9 (SLRR) 0.344,2.365 1.031,2.563 0.688,0.198 10 false 10 (SLAC) 0.344,2.792 1.063,2.99 0.719,0.198 10 false 22 (SLRL) 2.094,3.208 2.865,3.396 0.771,0.188 10 false 29 (SLRG) 0.979,3.344 1.719,3.542 0.74,0.198 10 false 30 (SLFG) 2.094,2.667 2.688,2.865 0.594,0.198 10 false 1 (SLB) 4.365,0.073 6.729,0.427 2.365,0.354 10 false Front view of wire harness connector: (to No. 1 Height Control Valve) 1.333,2.01 1.604,2.177 0.271,0.167 10 false K36 5.438,1.125 5.646,1.271 0.208,0.146 10 false N4 4.031,1.771 4.448,1.927 0.417,0.156 10 false SLRR 4.052,1.094 4.438,1.25 0.385,0.156 10 false SLRL 6.667,1.125 7.052,1.281 0.385,0.156 10 false SLFL 6.688,1.74 7.073,1.896 0.385,0.156 10 false SLFR 4.052,2.49 4.469,2.646 0.417,0.156 10 false SLRG 5,2.792 5.323,2.948 0.323,0.156 10 false SLB 5.635,2.813 6.021,2.969 0.385,0.156 10 false AHC- 6.698,2.49 7.083,2.646 0.385,0.156 10 false SLFG


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K36-1 (SLB) - N4-6 (SLB) Always Below 1 Ω
K36-7 (SLFR) - N4-4 (SLFR) Always Below 1 Ω
K36-7 (SLFR) - Body ground Always 10 kΩ or higher
K36-8 (SLFL) - N4-3 (SLFL) Always Below 1 Ω
K36-8 (SLFL) - Body ground Always 10 kΩ or higher
K36-9 (SLRR) - N4-1 (SLRR) Always Below 1 Ω
K36-9 (SLRR) - Body ground Always 10 kΩ or higher
K36-10 (SLAC) - N4-7 (AHC-) Always Below 1 Ω
K36-10 (SLAC) - Body ground Always 10 kΩ or higher
K36-22 (SLRL) - N4-2 (SLRL) Always Below 1 Ω
K36-22 (SLRL) - Body ground Always 10 kΩ or higher
K36-29 (SLRG) - N4-5 (SLRG) Always Below 1 Ω
K36-29 (SLRG) - Body ground Always 10 kΩ or higher
K36-30 (SLFG) - N4-8 (SLFG) Always Below 1 Ω
K36-30 (SLFG) - Body ground Always 10 kΩ or higher




OK

4.CHECK HARNESS AND CONNECTOR (BODY GROUND BETWEEN ECU - NO. 1 HEIGHT CONTROL VALVE)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK HARNESS AND CONNECTOR (BODY GROUND BETWEEN ECU - NO. 1 HEIGHT CONTROL VALVE)
a.

Disconnect the N4 No. 1 height control valve connector.


b.
U164794E01
0.319,0.278 2.684,0.635 2.365,0.357 10 Rear view of wire harness connector: (to Suspension Control ECU) 2.192,3.321 2.735,3.526 0.543,0.206 10 1 (SLB) 1.238,2.69 1.512,2.853 0.274,0.163 10 K36 1.619,3.548 2.054,3.408 2.054,3.408 2.14,3.408 false

Disconnect the K36 ECU connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K36-1 (SLB) - Body ground Always 10 kΩ or higher




OK

5.INSPECT NO. 1 HEIGHT CONTROL VALVE

NG

6.CHECK HARNESS AND CONNECTOR (BODY GROUND BETWEEN ECU - FRONT SUSPENSION CONTROL VALVE)
5.INSPECT NO. 1 HEIGHT CONTROL VALVE
a.

Connect the N4 No. 1 height control valve connector.


b.

Disconnect the K36 ECU connector.


c.
U164795E02
1.615,3.531 2.052,3.396 2.052,3.396 2.135,3.396 false 1.271,3.573 2.01,2.802 2.01,2.802 2.125,2.802 false 1.219,3.573 1.208,2.521 1.208,2.521 0.979,2.521 false 1.167,3.573 1.167,2.938 1.167,2.938 0.958,2.938 false 1.083,3.542 0.969,3.344 0.969,3.344 0.927,3.344 false 1.052,3.646 0.427,3.646 0.427,3.646 0.427,3.708 false 1.104,3.708 1.969,4.104 1.969,4.104 2.073,4.104 false 1.052,3.708 1.031,4.229 false 0.323,0.24 2.688,0.594 2.365,0.354 10 false Rear view of wire harness connector: (to Suspension Control ECU) 2.188,3.281 2.729,3.49 0.542,0.208 10 false 1 (SLB) 1.208,2.188 1.479,2.354 0.271,0.167 10 false K36 2.198,2.698 2.792,2.865 0.594,0.167 10 false 7 (SLFR) 0.25,2.396 0.844,2.563 0.594,0.167 10 false 8 (SLFL) 0.219,2.813 0.833,2.979 0.615,0.167 10 false 9 (SLRR) 0.073,3.219 0.771,3.385 0.698,0.167 10 false 10 (SLAC) 0.063,3.719 0.729,3.885 0.667,0.167 10 false 22 (SLRL) 2.167,3.99 2.938,4.156 0.771,0.167 10 false 29 (SLRG) 0.667,4.271 1.479,4.438 0.813,0.167 10 false 30 (SLFG)

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K36-7 (SLFR) - K36-1 (SLB) Always 3 to 3.8 Ω
K36-7 (SLFR) - Body ground Always 10 kΩ or higher
K36-8 (SLFL) - K36-1 (SLB) Always 3 to 3.8 Ω
K36-8 (SLFL) - Body ground Always 10 kΩ or higher
K36-9 (SLRR) - K36-1 (SLB) Always 3 to 3.8 Ω
K36-9 (SLRR) - Body ground Always 10 kΩ or higher
K36-10 (SLAC) - K36-1 (SLB) Always 3 to 3.8 Ω
K36-10 (SLAC) - Body ground Always 10 kΩ or higher
K36-22 (SLRL) - K36-1 (SLB) Always 3 to 3.8 Ω
K36-22 (SLRL) - Body ground Always 10 kΩ or higher
K36-29 (SLRG) - K36-1 (SLB) Always 3 to 3.8 Ω
K36-29 (SLRG) - Body ground Always 10 kΩ or higher
K36-30 (SLFG) - K36-1 (SLB) Always 3 to 3.8 Ω
K36-30 (SLFG) - Body ground Always 10 kΩ or higher
K36-1 (SLB) - Body ground Always 10 kΩ or higher




OK

REPLACE SUSPENSION CONTROL ECU

NG

REPLACE NO. 1 HEIGHT CONTROL VALVE

6.CHECK HARNESS AND CONNECTOR (BODY GROUND BETWEEN ECU - FRONT SUSPENSION CONTROL VALVE)
a.

Disconnect the N10 and N12 front suspension control valve connectors.


b.

Disconnect the N4 No. 1 height control valve connector.


c.

Disconnect the K36 ECU connector.


d.
U164793E01
0.319,0.278 2.684,0.635 2.365,0.357 10 Rear view of wire harness connector: (to Suspension Control ECU) 2.192,3.321 2.735,3.526 0.543,0.206 10 1 (SLB) 1.238,2.69 1.512,2.853 0.274,0.163 10 K36 1.619,3.548 2.054,3.408 2.054,3.408 2.14,3.408 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K36-1 (SLB) - Body ground Always 10 kΩ or higher




OK

7.CHECK HARNESS AND CONNECTOR (SUSPENSION CONTROL ECU - FRONT SUSPENSION CONTROL VALVE)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

7.CHECK HARNESS AND CONNECTOR (SUSPENSION CONTROL ECU - FRONT SUSPENSION CONTROL VALVE)

OK

REPLACE FRONT SUSPENSION CONTROL VALVE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR