Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR(w/o KDSS)
RM2660E _53 Suspension _052815 FRONT SUSPENSION _0255388 FRONT STABILIZER BAR(w/o KDSS) A

FRONT SUSPENSION  FRONT STABILIZER BAR(w/o KDSS)  INSTALLATION  


PROCEDURE

Hide 48815 1.INSTALL NO. 1 FRONT STABILIZER BAR BUSH

a.
C173669E05
1.135,1.792 1.563,1.99 0.427,0.198 10 false Bump 1.792,1.74 2.531,1.927 0.74,0.188 10 false Front Side 2.583,0.719 3.271,0.906 0.688,0.188 10 false Outer Side

Install the 2 bushes to the outer side of the bush stoppers on the front stabilizer bar as shown in the illustration.

NOTICE:

Be sure to install the front No. 1 stabilizer bar bushes so that the cut and bump of each bush faces the under of the vehicle.



Hide 48811 2.INSTALL FRONT STABILIZER BAR

a.
C357802E01
0.76,0.135 1.667,0.417 0.906,0.281 10 false Front Side

Set the stabilizer bracket so that the arrow mark is facing the front side of the vehicle.


b.
C173239

Temporarily install the 2 stabilizer brackets and front stabilizer bar with the 4 bolts.


Hide 48810 3.TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY LH

a.

Temporarily install the stabilizer link with the nut and bolt.


b.
C174417E05
2.552,0.063 2.927,0.406 0.375,0.344 10 true Nut

Tighten the nut.

Torque:
128 N*m (1305 kgf*cm, 94 ft.*lbf)


Hide 48820B 4.TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY RH

a.
C174416E05
0.573,0.052 0.948,0.385 0.375,0.333 10 true Nut

Temporarily install the stabilizer link with the nut and bolt.


b.

Tighten the nut.

Torque:
128 N*m (1305 kgf*cm, 94 ft.*lbf)


Hide 48829A 5.TIGHTEN NO. 1 FRONT STABILIZER BRACKET LH

a.
C173667E03
2.76,1.177 3.167,1.479 0.406,0.302 10 true 1, 3 0.875,1.563 1.135,1.854 0.26,0.292 10 true 2

Tighten the 2 bolts.

Torque:
87 N*m (887 kgf*cm, 64 ft.*lbf)

NOTICE:

Tighten the bolts in 3 steps, in the order shown in the illustration.



Hide 48824A 6.TIGHTEN NO. 1 FRONT STABILIZER BRACKET RH

a.
C173668E03
0.333,1.094 0.677,1.51 0.344,0.417 10 true 1, 3 2.083,1.656 2.354,1.917 0.271,0.26 10 true 2

Tighten the 2 bolts.

Torque:
87 N*m (887 kgf*cm, 64 ft.*lbf)

NOTICE:

Tighten the bolts in 3 steps, in the order shown in the illustration.



Hide 51405A 7.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53806 8.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 9.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 48810 11.TIGHTEN FRONT STABILIZER LINK ASSEMBLY LH

a.
C174418E03
0.896,1.531 1.219,1.823 0.323,0.292 10 false Bolt

Tighten the bolt.

Torque:
135 N*m (1376 kgf*cm, 100 ft.*lbf)

NOTICE:

Perform this procedure with all 4 wheels on the ground.



Hide 48820B 12.TIGHTEN FRONT STABILIZER LINK ASSEMBLY RH

a.
C174419E01
2.266,1.386 2.606,1.561 0.340,0.174 10 Bolt

Tighten the bolt.

Torque:
135 N*m (1376 kgf*cm, 100 ft.*lbf)

NOTICE:

Perform this procedure with all 4 wheels on the ground.