29300
1.INSTALL VACUUM PUMP ASSEMBLY
Apply engine oil to 2 new O-rings.
Install the 2 O-rings to the vacuum pump.
Install the vacuum pump so that the coupling teeth of the vacuum pump (labeled A) and the groove of the camshaft (labeled B) are aligned.
Be careful not to damage the O-ring.
Install the vacuum pump with the 3 bolts.
Confirm that the vacuum pump is not at an angle, and that there is no clearance between the fitting surfaces.
44774
2.CONNECT UNION TO CONNECTOR TUBE HOSE
Connect the hose to the vacuum pump.
3.INSTALL NO. 2 IDLER PULLEY BRACKET (w/ Viscous Heater)
16630H
4.INSTALL NO. 2 IDLER PULLEY (w/ Viscous Heater)
5.INSTALL V-RIBBED BELT (w/ Viscous Heater)
17806
6.INSTALL NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY
17364
7.INSTALL NO. 4 AIR TUBE
17342D
8.INSTALL NO. 2 AIR HOSE
9.INSTALL INTERCOOLER ASSEMBLY
Install the intercooler assembly (See page Engine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>INTERCOOLER>INSTALLATION).
29300
10.CHECK VACUUM PUMP OPERATION