Home › Brake › PARKING BRAKE › PARKING BRAKE SYSTEM › from 2015.08
RM2660E _54 Brake _052823 PARKING BRAKE _0255433 PARKING BRAKE SYSTEM N

PARKING BRAKE  PARKING BRAKE SYSTEM  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT PARKING BRAKE LEVER TRAVEL

a.

Fully pull the parking brake lever to engage the parking brake.


b.

Release the lever to disengage the parking brake.


c.

Slowly pull the parking brake lever all the way, and count the number of clicks.

Standard Parking Brake Lever Travel when Pulled with a Force of 200 N (20 kgf, 45 lbf):

5 to 7 clicks


If the parking brake lever travel is not as specified, adjust the parking brake shoe clearance and parking brake lever travel.


Hide 2.REMOVE REAR WHEEL

Hide 58833A 3.REMOVE UPPER CONSOLE COVER (w/o Console Box Lid)

Hide 58803C 4.REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/ Cool Box)

Hide 58803C 5.REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/o Cool Box)

Hide 6.ADJUST PARKING BRAKE LEVER TRAVEL

a.

Completely release the parking brake lever.


b.

Loosen the adjusting nut to completely release the parking brake cable.


c.
C170906

Temporarily install the hub nuts.


d.

Remove the hole plug.


e.
C158874E05
1.781,0.313 1.99,0.458 0.208,0.146 10 false (X) 1.698,1.042 2,1.313 0.302,0.271 10 true (Y)

Insert an adjustment tool into the adjustment hole of the disc. Rotate the adjustment wheel in the "X" direction until the shoes are locked. Then rotate the adjustment wheel in the "Y" direction 8 notches.


f.

Check that the disc can be rotated lightly. If not, rotate the adjustment wheel in the "Y" direction and check again.


g.

Install the hole plug.


h.

Remove the hub nuts.


i.
C170906

Turn the adjusting nut until the parking brake lever travel becomes correct.

Standard Parking Brake Lever Travel when Pulled with a Force of 200 N (20 kgf, 45 lbf):

5 to 7 clicks



j.

Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.

Standard Parking Brake Lever Travel when Pulled with a Force of 200 N (20 kgf, 45 lbf):

5 to 7 clicks



k.

Check whether the parking brake drags or not.


l.

When operating the parking brake lever, check that the brake warning light comes on.

Standard Condition:

The brake warning light always illuminates at the first click.



Hide 58833A 7.INSTALL UPPER CONSOLE COVER (w/o Console Box Lid)

Hide 58803C 8.INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/ Cool Box)

Hide 58803C 9.INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/o Cool Box)

Hide 10.INSTALL REAR WHEEL

Torque:
for Aluminum Wheel : 131 N*m (1336 kgf*cm, 97 ft.*lbf)
for Steel Wheel : 209 N*m (2131 kgf*cm, 154 ft.*lbf)