Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER › from 2015.08
RM2660E _54 Brake _052823 PARKING BRAKE _0255435 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


PROCEDURE

Hide 84550 1.INSTALL PARKING BRAKE SWITCH ASSEMBLY

a.

Install the parking brake switch with the screw.

Torque:
0.9 N*m (9 kgf*cm, 8 in.*lbf)


Hide 46201E 2.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

a.
C226756

Install the parking brake lever with the 2 bolts.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


b.

Install the parking brake lever support with the 2 bolts.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


c.

Install the straight pin to the parking brake lever.


d.
C226757

Connect the No. 2 parking brake cable and No. 3 parking brake cable to the No. 1 parking brake pull rod.


e.
C170906

Install the bush, compression spring and No. 1 parking brake pull rod to the parking brake lever with the adjusting nut.


f.

Install the parking brake return spring.


g.

Connect the parking brake switch connector.


Hide 3.ADJUST PARKING BRAKE

Hide 58812A 4.INSTALL LOWER CONSOLE BOX (w/o Console Box Lid)

Hide 88520 5.INSTALL COOLING BOX ASSEMBLY (w/ Cool Box)

Hide 58901A 6.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)