FUNCTION OF WARNING LIGHT AND MESSAGE
If a malfunction occurs during system operation, the master warning light on the combination meter comes on and "Check VGRS System" will be displayed on the multi-information display to inform the driver of the system malfunction.
DTC
Normal mode.
DTCs are stored in the steering control ECU and read using the tester (See page Steering>VARIABLE GEAR RATIO STEERING>VARIABLE GEAR RATIO STEERING SYSTEM>DTC CHECK / CLEAR).
Test mode.
By switching from normal mode to test mode, the steering angle sensor can be inspected (See page Steering>VARIABLE GEAR RATIO STEERING>VARIABLE GEAR RATIO STEERING SYSTEM>TEST MODE PROCEDURE).
Whether the system is in normal mode or test mode can be checked from the indication on the multi-information display. For details of the indication and how to check, refer to "DTC Check/Clear" (See page Steering>VARIABLE GEAR RATIO STEERING>VARIABLE GEAR RATIO STEERING SYSTEM>DTC CHECK / CLEAR).
CHECK MASTER WARNING LIGHT
Turn the engine switch on (IG).