If the steering control ECU detects a steering actuator standard position error, it will store DTC C1593/53.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1593/53 | The steering control ECU detects a steering actuator standard position error. | Steering actuator |
Clear the DTCs (See page Steering>VARIABLE GEAR RATIO STEERING>VARIABLE GEAR RATIO STEERING SYSTEM>DTC CHECK / CLEAR).
Recheck for DTCs (See page Steering>VARIABLE GEAR RATIO STEERING>VARIABLE GEAR RATIO STEERING SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| C1593/53 is not output | OK |
| C1593/53 is output | NG |
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG