84330
1.INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY
83910
2.INSTALL CLOCK ASSEMBLY
86211
3.INSTALL NO. 1 RADIO BRACKET
Install the bracket with the 3 bolts.
86212
4.INSTALL NO. 2 RADIO BRACKET
Install the bracket with the 3 bolts.
86120
5.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
Connect the connectors.
Insert the radio receiver to attach the 10 claws on its backside.
When inserting the radio receiver, do not press the knobs on it.
Install the radio receiver with the 2 screws and 2 bolts.
55680A
6.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
55670
7.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
55510F
8.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY
9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).