Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(w/o Stereo Component Amplifier) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255477 AUDIO AND VISUAL SYSTEM(w/o Stereo Component Amplifier) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/o Stereo Component Amplifier)  Speaker Circuit  


DESCRIPTION

The radio receiver sends sound signals to the speakers.

WIRING DIAGRAM

E156715E03
3.323,2.115 4.938,2.302 1.615,0.188 10 false Front No. 2 Speaker LH 3.323,1.948 3.573,2.115 0.25,0.167 10 false F8 3.281,3.698 4.875,3.885 1.594,0.188 10 false Front No. 2 Speaker RH 3.26,3.5 3.51,3.667 0.25,0.167 10 false F7 0.208,1.375 1.802,1.563 1.594,0.188 10 false Front No. 1 Speaker LH 0.208,2.906 1.844,3.094 1.635,0.188 10 false Front No. 1 Speaker RH 1.771,1.042 1.917,1.219 0.146,0.177 10 false 1 1.771,1.656 1.917,1.833 0.146,0.177 10 false 2 1.771,2.594 1.917,2.771 0.146,0.177 10 false 1 1.771,3.188 1.917,3.365 0.146,0.177 10 false 2 0.208,4.292 1.469,4.688 1.26,0.396 10 false Rear Speaker Set (LH Side) 0.229,5.25 1.406,5.604 1.177,0.354 10 false Rear Speaker Set (RH Side) 1.771,3.958 1.917,4.135 0.146,0.177 10 false 1 1.76,4.604 1.906,4.781 0.146,0.177 10 false 2 1.771,4.885 1.917,5.063 0.146,0.177 10 false 1 1.771,5.479 1.917,5.656 0.146,0.177 10 false 2 4.75,0.948 4.896,1.125 0.146,0.177 10 false 1 3.24,0.948 3.385,1.125 0.146,0.177 10 false 2 4.75,1.719 4.927,1.896 0.177,0.177 10 false 3 6.167,2.615 6.5,2.802 0.333,0.188 10 false FR+ 3.469,0.99 3.927,1.177 0.458,0.188 10 false TWL+ 3.469,1.698 3.875,1.885 0.406,0.188 10 false TWL- 3.25,1.719 3.427,1.896 0.177,0.177 10 false 4 4.521,0.979 4.646,1.156 0.125,0.177 10 false + 4.573,1.708 4.719,1.885 0.146,0.177 10 false - 4.75,2.49 4.896,2.667 0.146,0.177 10 false 1 3.25,2.49 3.396,2.667 0.146,0.177 10 false 2 4.75,3.281 4.927,3.458 0.177,0.177 10 false 3 3.469,2.521 3.927,2.708 0.458,0.188 10 false TWR+ 3.469,3.24 3.875,3.427 0.406,0.188 10 false TWR- 3.25,3.26 3.427,3.438 0.177,0.177 10 false 4 4.521,2.51 4.646,2.688 0.125,0.177 10 false + 4.573,3.24 4.719,3.417 0.146,0.177 10 false - 5.74,1.094 6.021,1.26 0.281,0.167 10 false F35 5.74,1.594 6.021,1.76 0.281,0.167 10 false F35 5.74,2.635 6.021,2.802 0.281,0.167 10 false F35 5.74,3.135 6.021,3.302 0.281,0.167 10 false F35 5.74,4.031 6.021,4.198 0.281,0.167 10 false F36 5.74,4.531 6.021,4.698 0.281,0.167 10 false F36 5.74,4.938 6.021,5.104 0.281,0.167 10 false F36 5.74,5.427 6.021,5.594 0.281,0.167 10 false F36 6.156,3.104 6.49,3.292 0.333,0.188 10 false FR- 5.823,2.365 6,2.542 0.177,0.177 10 false 1 5.833,2.875 5.958,3.052 0.125,0.177 10 false 5 6.167,1.073 6.5,1.26 0.333,0.188 10 false FL+ 6.167,1.563 6.5,1.75 0.333,0.188 12 false FL- 5.823,0.844 6,1.021 0.177,0.177 10 false 2 5.833,1.333 5.958,1.51 0.125,0.177 10 false 6 6.167,4 6.49,4.177 0.323,0.177 10 false RL+ 6.167,4.49 6.469,4.667 0.302,0.177 10 false RL- 5.844,3.771 6.021,3.948 0.177,0.177 10 false 2 5.823,4.26 6.01,4.438 0.188,0.177 10 false 6 6.167,4.927 6.5,5.104 0.333,0.177 10 false RR+ 6.167,5.417 6.5,5.594 0.333,0.177 10 false RR- 5.823,4.698 6,4.875 0.177,0.177 10 false 1 5.823,5.188 5.99,5.365 0.167,0.177 10 false 3 5.948,6.052 6.969,6.25 1.021,0.198 10 false Radio Receiver 0.219,1.156 0.469,1.323 0.25,0.167 10 false I10 0.229,2.698 0.385,2.865 0.156,0.167 10 false I1 0.219,4.094 0.479,4.281 0.26,0.188 10 false J17 0.229,5.042 0.49,5.229 0.26,0.188 10 false J15

PROCEDURE

1.CHECK SPEAKER
a.

Check the malfunctioning speakers.

Result
Result Proceed to
Malfunction in front speaker area A
Malfunction in rear speaker area B



A

2.CHECK SPEAKER

B

7.INSPECT REAR SPEAKER SET
2.CHECK SPEAKER
a.

Check the malfunctioning speakers.

Result
Result Proceed to
Front No. 2 speaker A
Front No. 1 speaker B



A

3.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

B

5.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
3.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.
E144969E46
0.154,0.003 0.486,0.260 0.332,0.258 10 *1

Disconnect the F8 and F7 speaker connectors.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always Below 1 Ω
3 - 4 Always Below 1 Ω
2 - 4 Always 8 Ω


Text in Illustration
*1 Component without harness connected
(Front No. 2 Speaker)



OK

4.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - FRONT NO. 2 SPEAKER)

NG

4.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - FRONT NO. 2 SPEAKER)
a.

Disconnect the F35 receiver connector.


b.

Disconnect the F8 and F7 speaker connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for LH:
Tester Connection Condition Specified Condition
F35-2 (FL+) - F8-1 (+) Always Below 1 Ω
F35-6 (FL-) - F8-3 (-)
F35-2 (FL+) - Body ground Always 10 kΩ or higher
F35-6 (FL-) - Body ground

for RH:
Tester Connection Condition Specified Condition
F35-1 (FR+) - F7-1 (+) Always Below 1 Ω
F35-5 (FR-) - F7-3 (-)
F35-1 (FR+) - Body ground Always 10 kΩ or higher
F35-5 (FR-) - Body ground




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.
E107214E17
0.153,0.064 0.475,0.274 0.322,0.210 10 *1

Disconnect the I10 and I1 speaker connectors.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω


Text in Illustration
*1 Component without harness connected
(Front No. 1 Speaker)



OK

6.CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER - FRONT NO. 1 SPEAKER)

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

6.CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER - FRONT NO. 1 SPEAKER)
a.

Disconnect the I10, I1, F8 and F7 speaker connectors.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for LH:
Tester Connection Condition Specified Condition
F8-2 (TWL+) - I10-1 Always Below 1 Ω
F8-4 (TWL-) - I10-2
F8-2 (TWL+) - Body ground Always 10 kΩ or higher
F8-4 (TWL-) - Body ground

for RH:
Tester Connection Condition Specified Condition
F7-2 (TWR+) - I1-1 Always Below 1 Ω
F7-4 (TWR-) - I1-2
F7-2 (TWR+) - Body ground Always 10 kΩ or higher
F7-4 (TWR-) - Body ground




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

7.INSPECT REAR SPEAKER SET
a.
E107214E17
0.153,0.064 0.475,0.274 0.322,0.210 10 *1

Disconnect the J17 and J15 speaker connectors.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω


Text in Illustration
*1 Component without harness connected
(Rear Speaker Set)



OK

8.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - REAR SPEAKER SET)

NG

8.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - REAR SPEAKER SET)
a.

Disconnect the F36 receiver connector.


b.

Disconnect the J17 and J15 speaker connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for LH:
Tester Connection Condition Specified Condition
F36-2 (RL+) - J17-1 Always Below 1 Ω
F36-6 (RL-) - J17-2
F36-2 (RL+) - Body ground Always 10 kΩ or higher
F36-6 (RL-) - Body ground

for RH:
Tester Connection Condition Specified Condition
F36-1 (RR+) - J15-1 Always Below 1 Ω
F36-3 (RR-) - J15-2
F36-1 (RR+) - Body ground Always 10 kΩ or higher
F36-3 (RR-) - Body ground




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR