Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(w/ Navigation System) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255478 AUDIO AND VISUAL SYSTEM(w/ Navigation System) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/ Navigation System)  B15D3  Stereo Component Amplifier Disconnected  


DESCRIPTION

The multi-media module receiver assembly, television display assembly* and stereo component amplifier assembly are connected by the MOST network.

When a MOST network error occurs between the multi-media module receiver assembly, television display assembly and stereo component amplifier assembly, these DTCs will be stored.

*: w/ Rear Seat Entertainment System


DTC Code DTC Detection Condition Trouble Area
B15D3 A device that is listed in the MOST network connected device record of the master unit is missing.
·

Stereo component amplifier assembly power source circuit

·

MOST circuit between multi-media module receiver assembly and stereo component amplifier assembly

·

MOST circuit between television display assembly and stereo component amplifier assembly*

·

Stereo component amplifier assembly

·

Multi-media module receiver assembly

·

Television display assembly*



*: w/ Rear Seat Entertainment System


HINT:

For the MOST network, the multi-media module receiver assembly is the master unit.


WIRING DIAGRAM

E349032E01
0.885,0.51 1.802,0.708 0.917,0.198 10 false from Battery 0.885,1.073 1.76,1.271 0.875,0.198 10 false from Battery 2.083,0.688 2.594,0.917 0.51,0.229 10 false AMP2 2.979,0.313 3.198,0.5 0.219,0.188 10 false 1 2.906,0.51 3.26,0.698 0.354,0.188 10 false F74 3.333,0.521 3.615,0.708 0.281,0.188 10 false +B 3.927,0.51 4.281,0.729 0.354,0.219 10 false MI+ 4.427,0.313 4.667,0.521 0.24,0.208 10 false 2 4.333,0.521 4.635,0.76 0.302,0.24 10 false F85 5.729,0.406 5.896,0.635 0.167,0.229 10 false 5 5.906,0.5 6.344,0.729 0.438,0.229 10 false MO+ 5.927,1.073 6.365,1.302 0.438,0.229 10 false MO- 5.74,0.979 5.875,1.198 0.135,0.219 10 false 6 4.333,1.063 4.635,1.302 0.302,0.24 10 false F85 4.396,0.885 4.656,1.094 0.26,0.208 10 false 3 3.958,1.073 4.24,1.281 0.281,0.208 10 false MI- 3.333,1.042 3.615,1.229 0.281,0.188 10 false +B2 2.896,1.063 3.25,1.25 0.354,0.188 10 false F74 2.948,0.865 3.167,1.052 0.219,0.188 10 false 16 2.083,1.219 2.594,1.448 0.51,0.229 10 false AMP1 2.99,1.427 3.208,1.615 0.219,0.188 10 false 3 2.917,1.635 3.271,1.823 0.354,0.188 10 false F74 2.917,2.188 3.271,2.375 0.354,0.188 10 false F74 4.323,1.625 4.625,1.865 0.302,0.24 10 false F85 2.969,1.979 3.188,2.167 0.219,0.188 10 false 18 3.333,1.635 3.708,1.833 0.375,0.198 10 false GND 3.344,2.188 3.844,2.438 0.5,0.25 10 false GND2 3.885,1.635 4.24,1.854 0.354,0.219 10 false SLDI 4.406,1.385 4.667,1.594 0.26,0.208 10 false 4 5.729,1.51 5.865,1.729 0.135,0.219 10 false 7 5.938,1.656 6.406,1.885 0.469,0.229 10 false SLDO 5,1.823 5.75,2.073 0.75,0.25 10 false Shielded 6.479,3.281 6.74,3.521 0.26,0.24 10 false *1 5.948,2.76 6.208,3 0.26,0.24 10 false MI+ 5.948,3.323 6.208,3.563 0.26,0.24 10 false MI- 5.927,3.896 6.365,4.135 0.438,0.24 10 false SLDI 5.75,2.615 5.885,2.833 0.135,0.219 10 false 2 5.74,3.188 5.875,3.406 0.135,0.219 10 false 3 5.729,3.771 5.865,3.99 0.135,0.219 10 false 4 5.802,4.333 6.167,4.573 0.365,0.24 10 false F84 5.802,4.51 7.063,5.01 1.26,0.5 10 false Multi-media Module Receiver Assembly 4.417,2.583 4.667,2.75 0.25,0.167 10 false 5 4.292,2.75 4.688,2.969 0.396,0.219 10 false F85 4.427,3.104 4.688,3.281 0.26,0.177 10 false 6 4.333,3.313 4.833,3.521 0.5,0.208 10 false F85 4.417,3.646 4.646,3.833 0.229,0.188 10 false 7 4.333,3.865 4.688,4.073 0.354,0.208 10 false F85 4.927,4.01 5.688,4.25 0.76,0.24 10 false Shielded 3.906,2.75 4.26,2.969 0.354,0.219 10 false MO+ 3.906,3.302 4.219,3.531 0.313,0.229 10 false MO- 3.813,3.875 4.219,4.104 0.406,0.229 10 false SLDO 3.313,2.719 3.667,2.938 0.354,0.219 10 false MO+ 3.344,3.281 3.656,3.51 0.313,0.229 10 false MO- 3.313,3.844 3.719,4.073 0.406,0.229 10 false SLDO 2.917,2.729 3.313,2.948 0.396,0.219 10 false F85 2.917,3.292 3.313,3.51 0.396,0.219 10 false F85 2.906,3.844 3.302,4.063 0.396,0.219 10 false F85 2.99,2.563 3.24,2.729 0.25,0.167 10 false 5 2.99,3.094 3.25,3.271 0.26,0.177 10 false 6 3,3.646 3.229,3.833 0.229,0.188 10 false 7 2.031,3.99 2.688,4.24 0.656,0.25 10 false Shielded 1.677,2.625 1.865,2.802 0.188,0.177 10 false 2 1.667,3.156 1.854,3.333 0.188,0.177 10 false 3 1.677,3.74 1.865,3.917 0.188,0.177 10 false 4 1.323,2.729 1.573,2.948 0.25,0.219 10 false MI+ 1.354,3.302 1.615,3.531 0.26,0.229 10 false MI- 1.271,3.854 1.635,4.083 0.365,0.229 10 false SLDI 0.865,3.302 1.052,3.5 0.188,0.198 10 false *2 3.198,4.313 4.406,4.75 1.208,0.438 10 false Stereo Component Amplifier Assembly 0.24,4.24 0.594,4.469 0.354,0.229 10 false L56 0.229,4.385 2.115,4.625 1.885,0.24 10 false Television Display assembly 0.417,4.74 3.177,5 2.76,0.26 10 false *1: w/o Rear Seat Entertainment System 0.417,5.063 3.635,5.313 3.219,0.25 10 false *2: w/ Rear Seat Entertainment System 0.792,5.448 1.979,5.677 1.188,0.229 10 false : MOST Network

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)
a.

Check for optional components.

i.

Check that optional components (including associated wiring) which generate radio waves are not installed.

Result
Result Proceed to
Optional components (including associated wiring) are installed. A
Optional components (including associated wiring) are not installed. B

HINT:
·

Electrical noise from radio waves generated by optional components or the wiring for those components may affect MOST communication.

·

This DTC may be stored when a MOST communication error occurs due to electrical noise.






A

2.REMOVE OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)

B

3.CLEAR DTC
2.REMOVE OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)
a.

Remove optional components (including associated wiring).

NOTICE:

Do not remove optional components or associated wiring without the permission of the customer.




NEXT

3.CLEAR DTC
4.CHECK DTC
a.

Recheck for DTCs and check if the same DTCs are output again (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(w/ Navigation System)>DTC CHECK / CLEAR).

OK:

No DTCs are output.




OK

END (COMMUNICATION MALFUNCTION DUE TO NOISE)

NG

5.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - BATTERY AND BODY GROUND)
5.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - BATTERY AND BODY GROUND)
a.
U166278E02
0.781,1.292 0.625,1.844 false 1.083,1.292 1.365,1.771 false 0.74,1.094 0.375,0.896 false 1.063,1.083 0.677,0.594 false 0.115,0.073 0.281,0.26 0.167,0.188 10 false *a 1.51,0.385 1.792,0.552 0.281,0.167 10 false F74 0.354,0.49 0.708,0.656 0.354,0.167 10 false GND 0.104,0.792 0.344,0.958 0.24,0.167 10 false +B 1.208,1.823 1.635,2 0.427,0.177 10 false GND2 0.427,1.917 0.76,2.094 0.333,0.177 10 false +B2

Disconnect the stereo component amplifier assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F74-3 (GND) - Body ground Always Below 1 Ω
F74-18 (GND2) - Body ground Always Below 1 Ω



c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
F74-1 (+B) - F74-3 (GND) Always 11 to 14 V
F74-16 (+B2) - F74-3 (GND) Always 11 to 14 V



Text in Illustration
*a Front view of wire harness connector
(to Stereo Component Amplifier Assembly)

Result
Result Proceed to
OK (w/o Rear Seat Entertainment System) A
OK (w/ Rear Seat Entertainment System) B
NG C


A

6.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - STEREO COMPONENT AMPLIFIER ASSEMBLY)

B

10.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - MULTI-MEDIA MODULE RECEIVER AND TELEVISION DISPLAY)

C

REPAIR OR REPLACE HARNESS OR CONNECTOR

6.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - STEREO COMPONENT AMPLIFIER ASSEMBLY)
a.

Disconnect the F84 multi-media module receiver assembly connector.


b.

Disconnect the F85 stereo component amplifier assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F84-2 (MI+) - F85-5 (MO+) Always Below 1 Ω
F84-3 (MI-) - F85-6 (MO-) Always Below 1 Ω
F84-4 (SLDI) - F85-7 (SLDO) Always Below 1 Ω
F84-5 (MO+) - F84-2 (MI+) Always Below 1 Ω
F84-6 (MO-) - F85-3 (MI-) Always Below 1 Ω
F84-7 (SLDO) - F85-4 (SLDI) Always Below 1 Ω
F84-2 (MI+) - Body ground Always 10 kΩ or higher
F84-3 (MI-) - Body ground Always 10 kΩ or higher
F84-4 (SLDI) - Body ground Always 10 kΩ or higher
F84-5 (MO+) - Body ground Always 10 kΩ or higher
F84-6 (MO-) - Body ground Always 10 kΩ or higher
F84-7 (SLDO) - Body ground Always 10 kΩ or higher




OK

7.REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

7.REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY
a.

Replace the stereo component amplifier assembly with a new or normally functioning one (See page Audio / Visual / Telematics>AUDIO / VIDEO>STEREO COMPONENT AMPLIFIER>REMOVAL).



NEXT

8.CLEAR DTC
9.CHECK DTC
a.

Recheck for DTCs and check if the same DTC is output again (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(w/ Navigation System)>DTC CHECK / CLEAR).

OK:

No DTCs are output.




OK

END (STEREO COMPONENT AMPLIFIER ASSEMBLY IS DEFECTIVE)

NG

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

10.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - MULTI-MEDIA MODULE RECEIVER AND TELEVISION DISPLAY)
a.

Disconnect the F84 multi-media module receiver assembly connector.


b.

Disconnect the F85 stereo component amplifier assembly connector.


c.

Disconnect the L56 television display assembly connector.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F84-5 (MO+) - F85-2 (MI+) Always Below 1 Ω
F84-6 (MO-) - F85-3 (MI-) Always Below 1 Ω
F84-7 (SLDO) - F85-4 (SLDI) Always Below 1 Ω
F85-5 (MO+) - L56-2 (MI+) Always Below 1 Ω
F85-6 (MO-) - L56-3 (MI-) Always Below 1 Ω
F85-7 (SLDO) - L56-4 (SLDI) Always Below 1 Ω
F85-2 (MI+) - Body ground Always 10 kΩ or higher
F85-3 (MI-) - Body ground Always 10 kΩ or higher
F85-4 (SLDI) - Body ground Always 10 kΩ or higher
F85-5 (MO+) - Body ground Always 10 kΩ or higher
F85-6 (MO-) - Body ground Always 10 kΩ or higher
F85-7 (SLDO) - Body ground Always 10 kΩ or higher




OK

11.REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

11.REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY
a.

Replace the stereo component amplifier assembly with a new or normally functioning one (See page Audio / Visual / Telematics>AUDIO / VIDEO>STEREO COMPONENT AMPLIFIER>REMOVAL).



NEXT

12.CLEAR DTC
13.CHECK DTC
a.

Recheck for DTCs and check if the same DTC is output again (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(w/ Navigation System)>DTC CHECK / CLEAR).



OK

END (STEREO COMPONENT AMPLIFIER ASSEMBLY IS DEFECTIVE)

NG

14.REPLACE TELEVISION DISPLAY ASSEMBLY
14.REPLACE TELEVISION DISPLAY ASSEMBLY
a.

Replace the television display assembly with a new or normally functioning one (See page Audio / Visual / Telematics>AUDIO / VIDEO>TELEVISION DISPLAY>REMOVAL).



NEXT

15.CLEAR DTC
16.CHECK DTC
a.

Recheck for DTCs and check if the same DTC is output again (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(w/ Navigation System)>DTC CHECK / CLEAR).



OK

END (TELEVISION DISPLAY ASSEMBLY IS DEFECTIVE)

NG

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY