Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(w/ Navigation System) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255478 AUDIO AND VISUAL SYSTEM(w/ Navigation System) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/ Navigation System)  B15F5  Air Conditioner ECU Vehicle Information Reading/Writing Processor Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the air conditioning amplifier assembly cannot be customized via the audio and visual system vehicle customization screen.

HINT:

The Air conditioning amplifier assembly controls the air conditioning system related items that are customizable via the multi-display assembly screen.


DTC Code DTC Detection Condition Trouble Area
B15F5 Air conditioning amplifier assembly vehicle setting processing error.
·

CAN communication system

·

Air conditioning system

·

Air conditioning amplifier assembly

·

Multi-media module receiver assembly



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Use the intelligent tester to check if the CAN communication system is functioning normally.


OK:

CAN communication DTCs are not output.


Result
Result Proceed to
OK A
NG (for LHD) B
NG (for RHD) C



A

2.CHECK AIR CONDITIONING SYSTEM

B

C

2.CHECK AIR CONDITIONING SYSTEM
a.

Check if the air conditioning system is malfunctioning (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the air conditioning system.


OK:

No malfunctions are present in the air conditioning system.




OK

3.CHECK CUSTOMIZE ITEMS

NG

3.CHECK CUSTOMIZE ITEMS
a.

Display the "Vehicle Customization" screen.


b.

Make a note of the customizable items for the air conditioning system.

HINT:

These air conditioning system items shown as customizable via the multi-display assembly vehicle customization screen can also be changed using the intelligent tester. In the following steps, the intelligent tester will be used.


i.

To match-up the items in the multi-display assembly with the items on the intelligent tester, check the customize parameters list for the air conditioning system related items that can be customized via the multi-display assembly screen (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>CUSTOMIZE PARAMETERS).



c.

Using the intelligent tester, confirm that it is possible to change the settings of the air conditioning system related customize parameters that are shown as customizable via the multi-display assembly screen.

OK:

The items available for customization via the multi-display assembly screen can be customized successfully using the intelligent tester.




OK

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY