Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (w/ Multi-display) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255488 AUDIO AND VISUAL SYSTEM(w/ Multi-display) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/ Multi-display)  Steering Pad Switch Circuit  


DESCRIPTION

This circuit sends an operation signal from the steering pad switch assembly to the multi-media module receiver assembly.

If there is an open in the circuit, the audio system cannot be operated using the steering pad switch assembly.

If there is a short in the circuit, the same condition as when a switch is continuously depressed occurs.

Therefore, the multi-media module receiver assembly cannot be operated using the steering pad switch assembly, and also the multi-media module receiver assembly itself cannot function.

WIRING DIAGRAM

E248926E09
4.719,4.479 5.604,5.302 0.885,0.823 10 false Spiral Cable Sub-assembly 1.385,5.854 3.396,6.073 2.01,0.219 10 false Steering Pad Switch Assembly 5.833,4.667 7.104,5.052 1.271,0.385 10 false Multi-media Module Receiver Assembly 5.01,3.531 5.375,3.677 0.365,0.146 10 false AU2 5.01,2.594 5.375,2.74 0.365,0.146 10 false EAU 5.01,1.615 5.375,1.76 0.365,0.146 10 false AU1 6.198,3.438 6.563,3.583 0.365,0.146 10 false SW2 5.948,3.313 6.115,3.5 0.167,0.188 10 false 31 6.198,2.469 6.563,2.615 0.365,0.146 10 false SWG 5.948,2.365 6.115,2.531 0.167,0.167 10 false 32 4.49,3.417 4.76,3.594 0.271,0.177 10 false z73 4.573,3.208 4.719,3.365 0.146,0.156 10 false 10 4.49,2.469 4.771,2.625 0.281,0.156 10 false z73 4.573,2.25 4.698,2.406 0.125,0.156 10 false 8 4.49,1.51 4.771,1.667 0.281,0.156 10 false z73 4.531,1.302 4.729,1.458 0.198,0.156 10 false 11 5.531,3.427 5.896,3.573 0.365,0.146 10 false E122 5.667,3.208 5.792,3.375 0.125,0.167 10 false 5 5.531,2.469 5.896,2.615 0.365,0.146 10 false E122 5.667,2.26 5.781,2.417 0.115,0.156 10 false 3 5.531,1.51 5.896,1.656 0.365,0.146 10 false E122 6.198,1.521 6.563,1.667 0.365,0.146 10 false SW1 5.667,1.292 5.792,1.448 0.125,0.156 10 false 6 5.948,1.396 6.104,1.573 0.156,0.177 10 false 30 0.833,1.938 1.417,2.115 0.583,0.177 10 false Volume- 1.604,1.948 2.188,2.125 0.583,0.177 10 false Volume+ 2.344,1.958 2.792,2.135 0.448,0.177 10 false Seek- 0.833,4.74 1.281,4.917 0.448,0.177 10 false Voice 2.01,4.75 2.615,4.927 0.604,0.177 10 false Off Hook 3.146,4.74 3.823,4.917 0.677,0.177 10 false On Hook 3.115,2.865 3.563,3.042 0.448,0.177 10 false MODE 3.115,1.958 3.563,2.135 0.448,0.177 10 false Seek+ 2.021,5.438 2.563,5.604 0.542,0.167 10 false RH Side 2,3.833 2.542,4 0.542,0.167 10 false LH Side 5.833,4.479 6.146,4.677 0.313,0.198 10 false F77

CAUTION / NOTICE / HINT

NOTICE:

The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).


PROCEDURE

1.INSPECT STEERING PAD SWITCH ASSEMBLY
a.

Remove the steering pad switch assembly (See page Steering>STEERING COLUMN>STEERING WHEEL>REMOVAL).


b.

Inspect the steering pad switch assembly (See page Steering>STEERING COLUMN>STEERING WHEEL>INSPECTION).



OK

2.INSPECT SPIRAL CABLE SUB-ASSEMBLY

NG

REPLACE STEERING PAD SWITCH ASSEMBLY

2.INSPECT SPIRAL CABLE SUB-ASSEMBLY
a.

Remove the spiral cable sub-assembly (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>REMOVAL).


b.

Inspect the spiral cable sub-assembly (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>INSPECTION).



OK

3.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - SPIRAL CABLE SUB-ASSEMBLY)

NG

REPLACE SPIRAL CABLE SUB-ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - SPIRAL CABLE SUB-ASSEMBLY)
a.

Disconnect the F77 multi-media module receiver assembly connector.


b.

Disconnect the E122 spiral cable sub-assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F77-30 (SW1) - E122-6 (AU1) Always Below 1 Ω
F77-31 (SW2) - E122-5 (AU2) Always Below 1 Ω
F77-32 (SWG) - E122-3 (EAU) Always Below 1 Ω
F77-30 (SW1) or E122-6 (AU1) - Body ground Always 10 kΩ or higher
F77-31 (SW2) or E122-5 (AU2) - Body ground Always 10 kΩ or higher
F77-32 (SWG) or E122-3 (EAU) - Body ground Always 10 kΩ or higher




OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR