This DTC is stored when items controlled by the main body ECU (cowl side junction block LH) cannot be customized via the audio and visual system vehicle customization screen.
Power door lock control system
Wireless door lock control system
Lighting system
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15F6 | Main body ECU (cowl side junction block LH) vehicle setting processing error. | ·
CAN communication system ·
Power door lock control system ·
Wireless door lock control system ·
Lighting system ·
Main body ECU (cowl side junction block LH) ·
Multi-media module receiver assembly |
Use the GTS to check if the CAN communication system is functioning normally.
for LHD with Central Gateway ECU (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for LHD with Central Gateway ECU)>DIAGNOSIS SYSTEM)
for LHD without Central Gateway ECU (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for LHD without Central Gateway ECU)>DIAGNOSIS SYSTEM)
for RHD with Central Gateway ECU (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for RHD with Central Gateway ECU)>DIAGNOSIS SYSTEM)
for RHD without Central Gateway ECU (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for RHD without Central Gateway ECU)>DIAGNOSIS SYSTEM)
CAN communication system DTCs are not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (for LHD with Central Gateway ECU) | B |
| NG (for LHD without Central Gateway ECU) | C |
| NG (for RHD with Central Gateway ECU) | D |
| NG (for RHD without Central Gateway ECU) | E |
A
B
C
D
E
Check if the power door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the power door lock control system.
No malfunctions are present in the power door lock control system.
OK
NG
Check if the wireless door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the wireless door lock control system.
No malfunctions are present in the wireless door lock control system.
OK
NG
Check if the lighting system is malfunctioning (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the lighting system.
No malfunctions are present in the lighting system.
OK
NG
Display the "Vehicle Customization" screen.
Make a note of the customizable items for each main body ECU (cowl side junction block LH) related system.
These items shown as customizable via the multi-display assembly vehicle customization screen can also be changed using the GTS. In a following step, the GTS will be used.
To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the power door lock control system related items that can be customized via the multi-display assembly screen (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS).
To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the wireless door lock control system related items that can be customized via the multi-display assembly screen (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>CUSTOMIZE PARAMETERS).
To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the lighting system related items that can be customized via the multi-display assembly screen (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS).
Using the GTS, confirm that it is possible to change the settings of the customize parameters that are available for customization via the multi-display assembly screen.
The items available for customization via the multi-display assembly screen can be customized successfully using the GTS.
OK
NG