This DTC is stored when items controlled by the front power seat switch LH*1 or front power seat switch RH*2 cannot be customized via the audio and visual system vehicle customization screen.
*1: for LHD
*2: for RHD
The front power seat switch LH*1 or front power seat switch RH*2 controls the front power seat control system related items that are customizable via the multi-display screen.
*1: for LHD
*2: for RHD
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15F8 | Front power seat switch vehicle setting processing error. | ·
CAN communication system ·
Front power seat control system ·
Front power seat switch LH*1 ·
Front power seat switch RH*2 ·
Multi-media module receiver assembly |
*1: for LHD
*2: for RHD
Use the GTS to check if the CAN communication system is functioning normally.
for LHD with Central Gateway ECU (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for LHD with Central Gateway ECU)>DIAGNOSIS SYSTEM)
for LHD without Central Gateway ECU (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for LHD without Central Gateway ECU)>DIAGNOSIS SYSTEM)
for RHD with Central Gateway ECU (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for RHD with Central Gateway ECU)>DIAGNOSIS SYSTEM)
for RHD without Central Gateway ECU (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for RHD without Central Gateway ECU)>DIAGNOSIS SYSTEM)
CAN communication system DTCs are not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (for LHD with Central Gateway ECU) | B |
| NG (for LHD without Central Gateway ECU) | C |
| NG (for RHD with Central Gateway ECU) | D |
| NG (for RHD without Central Gateway ECU) | E |
A
B
C
D
E
Check if the front power seat control system is malfunctioning (See page Vehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (w/ Seat Position Memory System)>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the front power seat control system.
No malfunctions are present in the front power seat control system.
OK
NG
Display the "Vehicle Customization" screen.
Make a note of the customizable items for each Front power seat switch LH related system.
These items shown as customizable via the multi-display assembly vehicle customization screen can also be changed using the GTS. In a following step, the GTS will be used.
Check the customize parameters list for the front power seat control system related items that can be customized via the multi-display assembly screen (See page Vehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (w/ Seat Position Memory System)>CUSTOMIZE PARAMETERS).
Manually change and confirm that it was possible to successfully change the settings of the customize parameters for each system that are available for customization via the multi-display assembly screen.
The items available for customization via the multi-display assembly screen can be customized successfully using the manual procedure.
OK
NG