Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255494 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Voice is not Recognized  


PROCEDURE

1.CHECK CONDITION
a.

Check if the system voice recognition level is low when recognizing a particular voice.

Result
Result Proceed to
System voice recognition level is low with any voice. A
System voice recognition level is low only for a particular voice. B

HINT:

System voice recognition level varies depending on voice and pronunciation. This is not a malfunction.




A

2.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

B

END

2.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)
a.
E187218E09
2.209,0.722 2.53,0.163 2.53,0.163 2.261,0.163 false 2.052,0.089 2.226,0.240 0.174,0.151 10 *a 1.655,1.881 1.829,2.032 0.174,0.151 10 *b 2.007,1.881 2.182,2.032 0.174,0.151 10 *c 2.354,1.881 2.528,2.032 0.174,0.151 10 *d 1.738,1.398 1.738,1.848 false 2.08,1.398 2.08,1.848 false 2.421,1.398 2.421,1.848 false 2.873,1.322 3.122,1.322 false 3.17,1.228 3.344,1.379 0.174,0.151 10 *e

Enter the "Microphone & Voice Recognition Check" screen. Refer to Check Mic & Voice Recognition in Operation Check (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>OPERATION CHECK).


b.

When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.


c.

Select the recording switch and perform voice recording.

HINT:
·

Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.

·

Voice can be recorded up to 5 seconds.




d.

Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

OK:

All check results are normal.



Text in Illustration
*a Microphone Input Level Meter
*b Recording Switch
*c Stop Switch
*d Play Switch
*e Recording Indicator


OK

3.REPLACE HARD DISC

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

3.REPLACE HARD DISC

b.

Check that voice recognition is normal.

OK:

Voice can be recognized normally.




OK

END (HARD DISC IS DEFECTIVE)

NG

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY